Author Topic: Cuda tailpanel  (Read 1226 times)

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
Cuda tailpanel
« on: September 12, 2009 - 12:39:37 PM »
Mopardave used SEM bumper paint on his Cuda,and i recently saw a tailpanel that was done with SEM trim black,thinned about 50%.Is this the same paint,and if not,anyone know the difference?




Offline E-Body Products

  • E-Body Products
  • Sr. Member
  • ****
  • Posts: 1016
  • American Jobs Are Our Children's Future!
    • E-BODY PRODUCTS
Re: Cuda tailpanel
« Reply #1 on: September 13, 2009 - 04:25:48 PM »
I am not sure what the difference is, but shouldn't it be PPG Organasol Textured Black?

Daniel

Offline mopardave

  • Sponsor
  • Resident
  • ***
  • Posts: 3294
  • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
    • rosevillemoparts
Re: Cuda tailpanel
« Reply #2 on: September 13, 2009 - 04:58:59 PM »
SEM trim Black, comes in a quart and it is reduced to spray, Satin finish and has a very miled texture and not 100% smooth, looks great, Most of the cudas we have seen have the same finish type of finish with the ppg,
Mopar Dave
Rosevillemoparts.com

if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




70 FK5 Challenger RT/SE
70 FC7 70 Road Runner - Sold
71 FM3 Challenger RT
71 Cuda (in process for restoration)
73 F8 Challenger
1990 XJ - sold
2000 Dakota Quad Cab
2010 Ram Crew Cab 2500 4wd - sold
2015 Ram Crew Cab 2500 4wd Black Out

Offline mopardave

  • Sponsor
  • Resident
  • ***
  • Posts: 3294
  • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
    • rosevillemoparts
Re: Cuda tailpanel
« Reply #3 on: September 13, 2009 - 05:03:17 PM »
here is the back after cured
Mopar Dave
Rosevillemoparts.com

if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




70 FK5 Challenger RT/SE
70 FC7 70 Road Runner - Sold
71 FM3 Challenger RT
71 Cuda (in process for restoration)
73 F8 Challenger
1990 XJ - sold
2000 Dakota Quad Cab
2010 Ram Crew Cab 2500 4wd - sold
2015 Ram Crew Cab 2500 4wd Black Out

Offline mopardave

  • Sponsor
  • Resident
  • ***
  • Posts: 3294
  • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
    • rosevillemoparts
Re: Cuda tailpanel
« Reply #4 on: September 13, 2009 - 05:11:19 PM »
another pic
Mopar Dave
Rosevillemoparts.com

if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




70 FK5 Challenger RT/SE
70 FC7 70 Road Runner - Sold
71 FM3 Challenger RT
71 Cuda (in process for restoration)
73 F8 Challenger
1990 XJ - sold
2000 Dakota Quad Cab
2010 Ram Crew Cab 2500 4wd - sold
2015 Ram Crew Cab 2500 4wd Black Out

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
Re: Cuda tailpanel
« Reply #5 on: September 14, 2009 - 09:19:03 AM »
Thanks for the pictures.Looks great.So is SEM trim black and SEM bumper paint the same thing?

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Cuda tailpanel
« Reply #6 on: September 14, 2009 - 12:33:47 PM »
Wow Dave, that is a very nice car.  I cannot wait until mine is painted black.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline ksierens

  • Sr. Member
  • ****
  • Posts: 1408
    • 70 Challenger Resurrection
Re: Cuda tailpanel
« Reply #7 on: September 14, 2009 - 12:56:27 PM »
I used SEM Trim Black on the bottom of my car, I love the stuff and it also comes in spray cans for touch ups.
1970 Triple Black Challenger R/T  440 Six Pack - 4 Speed - 3.55 Dana
Kurt - SE Michigan

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: Cuda tailpanel
« Reply #8 on: September 14, 2009 - 01:39:21 PM »
As was said above, organisol black is the correct paint to use on the tailpanel as well as the hood and fender tops on the AAR Cudas.  However the black on those above pictures looks great.  I think real organisol is kind of difficult to spray.  The SEM looks like a nice alternative.

Check out the restoration section and look for the thread on the blue AAR if you want to see what the organisol looks like.

Offline mopardave

  • Sponsor
  • Resident
  • ***
  • Posts: 3294
  • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
    • rosevillemoparts
Re: Cuda tailpanel
« Reply #9 on: September 14, 2009 - 04:33:40 PM »
The PPG has a bit more texture to it, to my under standing The sem trim and bumper paint are different, the quart number is SEM39144, RATTLE CAN SEM39143. We recomend to use the quart reduced for the larger paint jobs. here is another cuda we just finished.
Mopar Dave
Rosevillemoparts.com

if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




70 FK5 Challenger RT/SE
70 FC7 70 Road Runner - Sold
71 FM3 Challenger RT
71 Cuda (in process for restoration)
73 F8 Challenger
1990 XJ - sold
2000 Dakota Quad Cab
2010 Ram Crew Cab 2500 4wd - sold
2015 Ram Crew Cab 2500 4wd Black Out

Offline mopardave

  • Sponsor
  • Resident
  • ***
  • Posts: 3294
  • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
    • rosevillemoparts
Re: Cuda tailpanel
« Reply #10 on: September 14, 2009 - 04:34:51 PM »
with side view
Mopar Dave
Rosevillemoparts.com

if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




70 FK5 Challenger RT/SE
70 FC7 70 Road Runner - Sold
71 FM3 Challenger RT
71 Cuda (in process for restoration)
73 F8 Challenger
1990 XJ - sold
2000 Dakota Quad Cab
2010 Ram Crew Cab 2500 4wd - sold
2015 Ram Crew Cab 2500 4wd Black Out

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Cuda tailpanel
« Reply #11 on: September 14, 2009 - 06:11:07 PM »
Hey Dave cuda looks great.  How much would 2 quarts run?  I think I will need that much to do all I need to do.
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline mopardave

  • Sponsor
  • Resident
  • ***
  • Posts: 3294
  • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
    • rosevillemoparts
Re: Cuda tailpanel
« Reply #12 on: September 14, 2009 - 09:32:27 PM »
hey Gordon, how are things these days, AMD or Goodmark on the quarters?
Mopar Dave
Rosevillemoparts.com

if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




70 FK5 Challenger RT/SE
70 FC7 70 Road Runner - Sold
71 FM3 Challenger RT
71 Cuda (in process for restoration)
73 F8 Challenger
1990 XJ - sold
2000 Dakota Quad Cab
2010 Ram Crew Cab 2500 4wd - sold
2015 Ram Crew Cab 2500 4wd Black Out

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Cuda tailpanel
« Reply #13 on: September 14, 2009 - 09:45:54 PM »
Well they are still not on yet I have them and maybe move them this weekend I hope to my new house.  I hope they fit good when I get them on. 
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline E-Body Products

  • E-Body Products
  • Sr. Member
  • ****
  • Posts: 1016
  • American Jobs Are Our Children's Future!
    • E-BODY PRODUCTS
Re: Cuda tailpanel
« Reply #14 on: September 17, 2009 - 09:02:43 PM »
Dave,

The black cuda looks great!   :worshippy

Daniel