One of the magazines (I think High performance Mopar) rip
had their rust runner project car
with cop car wheels that they painted argent silver and put the trim rings and center cap off of
early '70's rallye wheels and it looked great
the bolt pattern is 4 1/2 on five
easily measured on your car. Take a tape measure and start on one side of the stud hole on a wheel.
Then roll the tape on the opposite side and measure to the middle of the hole
4 1/2" for mopar and ford. Early A-bodies are 4" on 5 for Mopar.
If you order the big steel wheels you start to loose performance as the wheels get heavier