News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: steering wheel retaining nut  (Read 644 times)

    Offline IndyCuda

    • Jr. Member
    • **
    • Posts: 124
    steering wheel retaining nut
    « on: October 28, 2009 - 06:58:49 PM »
    I am trying to rebuild my steering column on '72 baracuda w/o tilt. It needs a cam for the signal and a new ignition lock. I popped off the grant wheel ad grabbed an extension to remove the steering wheel retaining nut. The crush can will only allow me an 11/16 through the opening and it does not appear to be large enough. Is this a magic nut...?
    Logged


    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: steering wheel retaining nut
    « Reply #1 on: October 28, 2009 - 07:02:33 PM »
    Please post a picture as I'm confused.    :clueless:
    Logged

    Offline IndyCuda

    • Jr. Member
    • **
    • Posts: 124
    Re: steering wheel retaining nut
    « Reply #2 on: October 28, 2009 - 07:19:09 PM »
    It is a grant wheel and an aluminum crush can with this piece welded over the top...they got it on somehow
    Logged

    Offline Moparal

    • Permanent Resident
    • *******
    • Posts: 13085
    Re: steering wheel retaining nut
    « Reply #3 on: October 28, 2009 - 09:59:02 PM »
    well it should take like a 7/8 socket.  They may have welded that piece on after install. You may need to cut the hole bigger off to the left side.   Push a rag through the hole, then use a die grinder
    Logged
    Pages: [1]
    « previous next »