Where does it go

[coupman35]

I no it sound bad i cant remember whre they go i had them in a bag but i had nothing mark on it must a been a late fryday job.Is there a place on the site that some has and tell you where most of the bolt and nut go it would be good and handy .thanks

[Confederate Cuda]

They look like door panel screws

[dodj]

They look like door panel screws

[4yuckfous]

From the center console ?
Where the wire holds the top 

[BIGSHCLUNK]

From the center console ?
Where the wire holds the top 

Thats what I was thinking.... 

[coupman35]

I look at my spare car and did see them screw on the door panels.I have about 12 of them so am still looking where they gosome one most no !

[73Chally]

I don't really understand your last post, but those are door panel screws.

[burdar]

What years used that cable on the console door?  Dads 73 never had that.  The door just opened up until it hit the passengers seat.

I just purchased an ICCA fastener manual.  That has a desription and picture of all the nuts/bolts/screws on the E-bodies.  If you can justify the price of the manual it is a good reference.

[MEK-Dangerfield]

I know 70's had it, possibly 71's.   

[coupman35]

I look at my other car the one i get some parts from ,I looked at the door panels screw and they are not the same that i have in the top pic
Saw this on ebay*** Coronet, Challenger & Dart ***

** moulding screws **

You are buying thirty (30) NEW fasteners. They are zinc plated steel steel moulding screws for various nylon body trim mouldings, vinyl top mouldings and window reveal mouldings on various years of Dodge Coronet, Challenger and Dart. These fasteners are, #4 x 3/8 long, phillips flat head tapping screws with a shoulder. The perfect answer to those broken off body studs

They are the same as i have .

Hey burdar what does your book say this are for where did you get the book and how much was it

[burdar]

http://www.iccahome.org/

It was $75 plus shipping.  When I took my car appart in 98 everything was just thrown into a big plastic tub.  I needed this manual so that I could organize everything.  The good thing about it is that it also tells you the correct plating the fastener is supposed to have. 

So far I havn't been able to find the reference reguarding the bolts and clips that hole the late 72-74 vapor tank to the shock x-member.  Either it was left out of the manual or I'm looking in the wrong place.

[burdar]

I just looked in the fastener guide and that screw is a front door panel screw.  It is very similar to the console lid to body mount strap screw.  The strap screw looks like it has a built in washer on the head. 

[coupman35]

Am going to try that tomorrrow am almost do whit my dash .