Eddy Torker 440 Intake

[outlawse]

 Guys:

I found a brand new in box Eddy Torker 440 intake. Now I had planned on buying a Performer RPM, but I am reconsidering now. Torker 440 = FREE!!!!!! & NEW

So the next question is this, what is the power range of the Torker ??

And would it work well with the Mopar 484 114 LSA cam I plan to buy. The cam range is = 2,200-5,900.

Thoughts

[Strawdawg]

two flavors of Torkers plus the Eddy rpm

http://www.moparmusclemagazine.com/techarticles/engine/mopp_0207_intake_manifold_engine_and_rpm_range_test/index.html

Free might not be bad

Everytime I see a set of tests, I am glad I followed CP's advice and found a Street Dominator.

[Road_Runner]

That I recall that is the perfect rpm range for the Torker manifold.  I would strongly consider at least trying it on your engine.  (I gave you my history with this manifold in your M1 vs. Ede thread).

Later, Jim

[mojavered]

That is pretty intersting.  I looked around for something like that quite a while ago and never found anything.  I have a Torker II and had heard that it was not a good performer.  So I bought a Performer RPM and it is on the engine now.  Some day, I will have to do a swap, depending on how they line up, and see what happens.  I wonder how the Street Dominator would have performed had it been stock??  Good article, thanks for posting!

[71chally416]

Had one of those on my old 70 chally along with the smaller factory cam (Hemi grind), cheapo small tube headers, a Holley carb off a 428 Ford and the factory electronic ignition. No headwork (porting) and a stock engine rebuild on a '67 440 motor. It did 12.20's in good weather with 9" slicks. 4.10 Dana rear with a pinion snubber & 4 speed & Auto at different times. A very fun car. 

I would definately get it and use it.   

[outlawse]

My dad's garage is full of treasures:
Another 440, a complete 383 & 727, 3 8.75 rears, New Torker Intake, used but looks like new 474 cam, a rusty 509 cam, and a complete 58 392 Hemi and 57 354 Hemi.

Pop is a Mopar Junky...lol

[71chmark]

I have one on my 440.  Works great.

[outlawse]

71chmark ,
what cam are your running?

[71chally416]

I have one on my 440.  Works great.

That's the same one I had. 

[71chmark]

My friend put the cam in about 20 years ago (when it was his motor).  He called it a purple hemi grind cam.  Whatever that is.  I think 284/484.