Author Topic: What ECU box these days?  (Read 8180 times)

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: What ECU box these days?
« Reply #30 on: April 11, 2010 - 11:32:24 AM »
Quick question on the mopar chrome box I got....it has only 4 pins (my autozone and napa ecus have 5)....not an issue from what I can tell, correct?  I also use the 4 pin ballast, and from what I understand the circuit with the brown wires is all that is needed.....right?
all newer ECU have only 4 pins , the ballast feeds the coil with the brown wire & the ECU with the other side with the green & red wire , the green / red wire is eliminated

Challenger - You`ll wish You Hadn`t




Offline shadango

  • Resident
  • *****
  • Posts: 3920
Re: What ECU box these days?
« Reply #31 on: April 11, 2010 - 11:40:16 AM »
Ok, cool.   The harness I bought from Bill evans included those extra wires at the ballast so I had them hooked up.....but like i said, the replacement ECU I had bought at AZ has 5 pins.  The mopar doesnt thats why I was wondering.

Nothing to worry about?


Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: What ECU box these days?
« Reply #32 on: April 11, 2010 - 10:47:36 PM »
makes no difference , there is power to the ballast but no load as the power goes nowhere

Challenger - You`ll wish You Hadn`t