Author Topic: how much spring pressure is too much? (Read 877 times)

bb71challenger · « **on:** April 30, 2010 - 02:15:19 AM »

The heads I have coming have pretty serious springs on them just reading the advert. If I am going to run a middle of the road hydraulic flat tappet cam, at what point is too much spring pressure a bad thing? I do have a set of hardly used 911 Comp springs that are on my 906 heads. I am not going to go crazy with lift, I am looking at this voodoo cam kit.

http://www.lunatipower.com/Product.aspx?id=2337&gid=297

BTW, I am using Crane gold rockers with 1.65 ratio.

Chryco Psycho · « **Reply #1 on:** April 30, 2010 - 02:26:52 AM »

Contact Lunati to see what they require for the cam grind you have & test the springs you have to be sure they are adequate

dlrogers · « **Reply #2 on:** April 30, 2010 - 02:52:28 AM »

This might help
http://www.lunatipower.com/ProductGroup.aspx?id=193&cid=23&pid=2
Cheers

nqkjw · « **Reply #3 on:** May 04, 2010 - 10:53:59 AM »

I reckon your 911s would be fine on that cam with std rocker ratio but could be marginal with your 1.65 ratio.

Just my 2.2c

Author Topic: how much spring pressure is too much? (Read 877 times)

bb71challenger

how much spring pressure is too much?

Chryco Psycho

Re: how much spring pressure is too much?

dlrogers

Re: how much spring pressure is too much?

nqkjw

Re: how much spring pressure is too much?