Author Topic: wheel alignment question  (Read 1273 times)

Offline barryv

  • Jr. Member
  • **
  • Posts: 193
wheel alignment question
« on: August 21, 2010 - 06:27:41 PM »
hi, i just brought my 72 cuda into- tire plus  - for an alignment after i rebuild front end completely with moog parts. they told me to properly align i would have to get upper control arm cam bolts that are adjustable.does that sound right and are the com bolts that are in my upper control arms different then what they sell nowadays.thanks for the help




Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: wheel alignment question
« Reply #1 on: August 21, 2010 - 06:40:37 PM »
Images of replacements are the same as the OE parts...unless someone removed the proper pieces from yours.

Rock-Auto calls this an alignment kit under suspension

 
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline 72rtchallenger

  • Sr. Member
  • ****
  • Posts: 1734
  • 72 to 70 clone
    • cardomain
Re: wheel alignment question
« Reply #2 on: August 21, 2010 - 07:56:20 PM »
Images of replacements are the same as the OE parts...unless someone removed the proper pieces from yours.

Rock-Auto calls this an alignment kit under suspension

 


 :iagree: you should take a close look at them,,I had one shop tell me I had the wrong tie rods sleeves because the sleeve had left handed threads on one side and he had to take the end loose to adjust it properly,,of course he was wrong so I just took it to a better shop as the sleeves were original parts,,older than he was lol
72rtchallenger
my challengers restro at http://www.cardomain.com/ride/399010
what happens in the garage
stays in the garage

Offline barryv

  • Jr. Member
  • **
  • Posts: 193
Re: wheel alignment question
« Reply #3 on: August 24, 2010 - 07:50:42 PM »
thanks for the replies