News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Loose Box  (Read 954 times)

    Offline CHL2T

    • Full Member
    • ***
    • Posts: 823
    • Handle it, man!
    Loose Box
    « on: May 09, 2010 - 02:33:22 PM »
    I was out driving the Cuda yesterday, and noticed the steering was a little loose (manual), upon inspection this morning, I found that all three bolts were loose (again). I torqued them down last year, but apparently they want to work loose the more I drive. I don't mind having to tighten them up but I would like to not have to do it again.
    Any suggestions?
    locktite? Lock washers? or just keep checking them
    Logged


    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Loose Box
    « Reply #1 on: May 09, 2010 - 04:37:19 PM »
    Are they the correct factory bolts?  The thread fits seems tighter than standard with the factory hardware.
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline CHL2T

    • Full Member
    • ***
    • Posts: 823
    • Handle it, man!
    Re: Loose Box
    « Reply #2 on: May 09, 2010 - 05:40:36 PM »
    Quote from: matt63 on May 09, 2010 - 04:37:19 PM
    Are they the correct factory bolts?  The thread fits seems tighter than standard with the factory hardware.
    Factory bolts, near as I can tell
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Loose Box
    « Reply #3 on: May 09, 2010 - 11:45:10 PM »
    the nuts should be like a wheel nut with the tapered end into the taper on the wheel , if you have the correct nuts & they are coming loose I would use some blue locktite
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline the_engineers

    • Resident
    • *****
    • Posts: 2639
    • Cheap, fast, reliable...pick 2
    Re: Loose Box
    « Reply #4 on: May 10, 2010 - 01:55:21 PM »
    Quote from: Chryco Psycho on May 09, 2010 - 11:45:10 PM
    the nuts should be like a wheel nut with the tapered end into the taper on the wheel , if you have the correct nuts & they are coming loose I would use some blue locktite
    For the wheel...I think he's saying the steering box to K-member bolts.
    Logged
    Brooks

    1971 'Cuda 360
    2004 Infiniti G35 6-spd Coupe
    2001 Toyota Solara Convertible
    2002 GMC Savana 1500 Explorer Hightop Conversion
    1972 Dodge Dart Swinger...keeping the Slant.  Rocking the turbos.

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Loose Box
    « Reply #5 on: May 10, 2010 - 03:50:10 PM »
     ::)
     you are correct , I swore I saw wheel in his post
     anyway Use locktite
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline CHL2T

    • Full Member
    • ***
    • Posts: 823
    • Handle it, man!
    Re: Loose Box
    « Reply #6 on: May 10, 2010 - 05:14:34 PM »
    Thanks guys :2thumbs:
    Locktite blue it is!
    Logged

    Offline 'Cuda Hunter

    • Sr. Resident
    • ******
    • Posts: 9102
    • Tastes Like Chicken
    Re: Loose Box
    « Reply #7 on: May 10, 2010 - 06:55:08 PM »
    And here I thought i was going to see a picture of a loose box!   :bigsmile:

    Gotta get my mind out of the gutter.  :misbehaving:
    Logged
    "All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

    Offline CHL2T

    • Full Member
    • ***
    • Posts: 823
    • Handle it, man!
    Re: Loose Box
    « Reply #8 on: May 11, 2010 - 08:12:43 PM »
    Quote from: 'Cuda Hunter on May 10, 2010 - 06:55:08 PM
    And here I thought i was going to see a picture of a loose box!   :bigsmile:

    Gotta get my mind out of the gutter.  :misbehaving:

    If that was the case, I woulda posted in babe pics :smilielol:
    Logged
    Pages: [1]
    « previous next »