Author Topic: Front window trim clip locations?  (Read 1276 times)

Offline Chlngrcrzy

  • Sr. Member
  • ****
  • Posts: 1410
Front window trim clip locations?
« on: May 19, 2010 - 09:34:28 PM »
Someone have any close up shots where the clips and screw style locations are on the front window?     :feedback:




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Front window trim clip locations?
« Reply #1 on: May 20, 2010 - 10:48:51 AM »
just mounted mine yesterday , no pix tough , there are 3 on the side pillar & 6 across the top spaced approx 7 " apart , I used an awl to find the holes

Challenger - You`ll wish You Hadn`t

Offline Killer_Mopar

  • Sr. Member
  • ****
  • Posts: 1886
Re: Front window trim clip locations?
« Reply #2 on: May 20, 2010 - 04:40:33 PM »
just mounted mine yesterday , no pix tough , there are 3 on the side pillar & 6 across the top spaced approx 7 " apart , I used an awl to find the holes

LOL, I just did mine yesterday as well.

Mark the holes before you put the top down if you haven't already installed it. I would imagine it would be a pain in the ass to find them blindly...i seem to remember hearing that they differ from car to car :clueless: If you need some measurements, let me know....
70 Challenger R/T SE - The never-ending project........

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: Front window trim clip locations?
« Reply #3 on: May 20, 2010 - 08:28:27 PM »
I'll post a pic or two tonight, my windshield is still out. Here are some pictures, hope they help. I purposely left them large



« Last Edit: May 21, 2010 - 09:55:57 AM by ntstlgl1970 »
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

Offline Chlngrcrzy

  • Sr. Member
  • ****
  • Posts: 1410
Re: Front window trim clip locations?
« Reply #4 on: May 24, 2010 - 09:13:23 AM »
Perfect. Thanks for the pics.  I will have to drill all my holes yet. I installed a new roof, and the sides had the little pins. But i hhad shaved them off. Do the clips sit all the way down onto the window lip or are they centered, or are they flush with the top?

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Front window trim clip locations?
« Reply #5 on: May 24, 2010 - 09:32:00 AM »
the clips sit tight against the bottom lipthat the window seal sits on 

Challenger - You`ll wish You Hadn`t

Offline Challenger III

  • Sr. Member
  • ****
  • Posts: 1290
Re: Front window trim clip locations?
« Reply #6 on: May 24, 2010 - 09:54:24 AM »
 :popcorn:
Mike    Yakima, Washington

Resto Thread:  http://www.cuda-challenger.com/cc/index.php?topic=66668.0

Offline Chlngrcrzy

  • Sr. Member
  • ****
  • Posts: 1410
Re: Front window trim clip locations?
« Reply #7 on: May 24, 2010 - 10:38:09 PM »
Thanks CP