Timing a 318 Cui.

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Timing a 318 Cui.  (Read 2167 times)

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Timing a 318 Cui.
    « on: May 26, 2010 - 03:56:08 PM »
    Hi Guys.

    Can you guys school me. my ´70 318 need to be timet correct.

    Its has Mopar electronic distributor.

    Thanks Guys  :worshippy
    « Last Edit: June 12, 2010 - 05:30:51 PM by Danishmopar »
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Timing a 318 Cui, school me.
    « Reply #1 on: May 28, 2010 - 10:28:32 AM »
    you need to be in the 35-38* range above the advance curve , if it needs more timing at idle you will need to shorten the curve by either dialing off the vacuum adance with an allen wrench in the vacuum pot of the dist or disconnecting it totally
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Timing a 318 Cui, school me.
    « Reply #2 on: May 28, 2010 - 10:33:49 AM »
    Here's a methodical step by step from our local club president.
      http://tvmoparclub.com/files/tech/Mopar%20Timing.pdf
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Timing a 318 Cui, school me.
    « Reply #3 on: May 28, 2010 - 04:05:25 PM »
    Thanks guys  :thumbsup:

    Super reading.

    Will it be possible to time it without the timing tape on the damper. I will first have timing tape monday.

    I have 10 degrees before and after tdc on the timing cover.

    Thanks Guys
    « Last Edit: May 28, 2010 - 04:23:08 PM by Danishmopar »
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Timing a 318 Cui, school me.
    « Reply #4 on: May 28, 2010 - 04:36:44 PM »
    From Step -1  "-Attach Mopar timing tape or measure and mark degree increments on the vibration damper to about 40 BTDC. (Note 1 inch equals 16 and 2 ¼ inches equals 36."
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Timing a 318 Cui, school me.
    « Reply #5 on: May 29, 2010 - 12:59:10 AM »


    I Should open my eyes.

    Thanks bullitt  :cheers:
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Timing a 318 Cui, school me.
    « Reply #6 on: May 29, 2010 - 08:57:24 AM »
    You can buy a dial back timing light instead of the tape if you want.

    Tom :burnout:
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Timing a 318 Cui, school me.
    « Reply #7 on: June 12, 2010 - 05:30:09 PM »

    Hi guys.

    So it was time for timing my ´70 318.
    At idle i have 15 degrees and 34 degrees at 3000 rpm with out vacuum, fine i think. But with vacuum it advance up to 55 degrees, its that right :cheers:

    I running MP electronic ignition.

    Thanks guys
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline 72bluNblu

    • Sr. Member
    • ****
    • Posts: 1836
    Re: Timing a 318 Cui, school me.
    « Reply #8 on: June 13, 2010 - 01:36:28 AM »
    Quote from: Danishmopar on June 12, 2010 - 05:30:09 PM
    Hi guys.

    So it was time for timing my ´70 318.
    At idle i have 15 degrees and 34 degrees at 3000 rpm with out vacuum, fine i think. But with vacuum it advance up to 55 degrees, its that right :cheers:

    I running MP electronic ignition.

    Thanks guys

    It sounds pretty much exactly what mine was like. I dialed the vacuum adjustment down, but that's pretty close to what I ended up with. Which is why I unhooked my vacuum advance and run 16* at idle, I adjusted the mechanical advance and sit at 36* at full advance.
    Logged

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Timing a 318 Cui.
    « Reply #9 on: June 13, 2010 - 12:53:15 PM »
    Found this recommendation

     "Drive the car. If it bucks at part throttle or on the freeway while cruising, turn the allen wrench one full turn counterclockwise. This will retard the vacuum advance. "
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!
    Pages: [1]
    « previous next »