News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: YOU GOTTA BE F##$ING KIDDING ME!  (Read 1698 times)

    Offline GreenFish

    • Sr. Member
    • ****
    • Posts: 1281
    YOU GOTTA BE F##$ING KIDDING ME!
    « on: July 01, 2010 - 07:38:48 AM »
     :swear:

    ok so i've been putting the tremec back in the cuda this week.. yes this whole stinking week. Couldnt figure out why it wouldnt go back in the car. I put a new collar over the input shaft for the the Ram Clutch TOB and like a good mechanic uses some nice grade 8 washers for the bolts.

    well, ive been wrestling with this thing all week thinking it just wasnt lined up correctly or something like that when my buddy comes down to help me out. We pull it back out to have a look see and he notices the washers are hanging over the edge of the collar just a slight little bit... and they look scratched.

    SOB!!  :stomp:  that little bit of hang over has been keeping the trans from going into the bell housing. It didnt seem like it because the input shaft was right at the teeth for the clutch plate.

    Soooo.. i take the washers off and the thing slips right in...   :woo: :woohoo: :roflsmiley:


    « Last Edit: July 01, 2010 - 07:43:16 AM by GreenFish »
    Logged
    70 cuda, 440, KB pistons, 10.5:1 compression, edlebrock heads,RacerBrown cam, 5-Speed Tremec, Megasquirt EFI


    Offline Aussie Challenger

    • Resident
    • *****
    • Posts: 3407
    • In Kansas loaded for Drive to West Coast.
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #1 on: July 01, 2010 - 08:02:09 AM »
    I'll bet you won't do that again.   :horse:   Good that you now have it in.   :2thumbs:
    Logged
    Dave

    Offline Challenger III

    • Sr. Member
    • ****
    • Posts: 1290
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #2 on: July 01, 2010 - 09:57:27 AM »
     :scared: Oh no!  I bet you feel better now! ?  :lol:
    Logged
    Mike    Yakima, Washington

    Resto Thread:  http://www.cuda-challenger.com/cc/index.php?topic=66668.0

    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #3 on: July 01, 2010 - 10:02:08 AM »
    Never slips right in for me . . . always a struggle.   :swear:
    Logged

    Offline LukeSkywalker

    • Jr. Member
    • **
    • Posts: 189
    • Plymouth
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #4 on: July 01, 2010 - 11:09:12 AM »
    Quote from: GreenFish on July 01, 2010 - 07:38:48 AM
    Soooo.. i take the washers off and the thing slips right in...   :woo: :woohoo: :roflsmiley:

    Yeah, don't you feel so much better when you take something apart, put it together again and you have left over parts...  ;D
    Logged

    Offline BIGSHCLUNK

    • Sr. Resident
    • ******
    • Posts: 9341
    • Miss NIKKI - were you this hot at 48?
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #5 on: July 01, 2010 - 11:13:29 AM »
    We have ALL been there, anyone saying other wise is lying!  :grinyes:
    Logged
    70 Chally R/T Convertible- Yes she's really got a HEMI, no she's not a Charger!
                                                 [o o o o]
                                                      OO
                                                      OO 
                                                  [o o o o]
    https://www.aanddtruckautoparts.com/
    http://www.facebook.com/pages/A-D-Truck-and-Auto-Parts/67427352555?ref=hl

    Offline aris_unlimited

    • Project in full swing
    • Full Member
    • ***
    • Posts: 800
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #6 on: July 01, 2010 - 07:53:47 PM »
    Yeah transmissions can be a pain to install. It took me and my dad about 4-5 hours to put in a new transmission on his jeep. Just couldn't seem to get it lined up right lol. Which really sucked for me, as we didn't have a transmission jack so the honor of that position fell to me. I was soooo happy when that thing finally slid in lol.
    Logged
    Cuda is gone :(

    74 satellite, daily driver/project now

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #7 on: July 01, 2010 - 08:53:20 PM »
    Quote from: 4Cruizn on July 01, 2010 - 10:02:08 AM
    Never slips right in for me . . . always a struggle.   :swear:

     :roflsmiley:

    Tom :biggrin:
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline cudadave72

    • Sr. Member
    • ****
    • Posts: 1857
    • you motorboatin sob!!!
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #8 on: July 01, 2010 - 09:52:36 PM »
    Sounds like you have my kind of luck! :banghead:
    Logged
    1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!

    Offline challydust

    • Jr. Member
    • **
    • Posts: 163
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #9 on: July 02, 2010 - 10:15:42 AM »
    We all have this sorta luck doin these projects...its just the way it is....I still ask myself why I have this hobby....oh yeah cause I love these cars..lol

    As they say....."If it has tits or tires, you'll have problems with it"
    Logged

    Offline HemiOrange70

    • Resident
    • *****
    • Posts: 2062
    Re: YOU GOTTA BE F##$ING KIDDING ME!
    « Reply #10 on: July 03, 2010 - 01:16:30 AM »
    Thank goodness for Friends  :drunk:
    Logged
    Pages: [1]
    « previous next »