News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Oil Filter Plate Assistance  (Read 1315 times)

    Offline daveh

    • Full Member
    • ***
    • Posts: 813
    Oil Filter Plate Assistance
    « on: July 19, 2010 - 03:00:43 PM »
    Hey guys,

    Does anyone know where I can get an oil filter plate for my 340 like in the attached picture?  Thanks

    Dave

    Logged


    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: Oil Filter Plate Assistance
    « Reply #1 on: July 19, 2010 - 06:23:09 PM »
    Those are all over the junk yards on the small blocks. It's the 90 degree adapter, needed for headers that are hard to find.
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline Changin Gears

    • Sr. Member
    • ****
    • Posts: 1011
    Re: Oil Filter Plate Assistance
    « Reply #2 on: July 19, 2010 - 08:51:35 PM »
    That one has some additional holes drilled.  Standard no cost oil system upgrade.
    Logged


    The goal never changes - Stop the 60' timer with your back tires

    Offline AARCUDADEN

    • Sr. Member
    • ****
    • Posts: 1696
    Re: Oil Filter Plate Assistance
    « Reply #3 on: July 19, 2010 - 11:43:36 PM »
    I think i have one of those on my shelve in the garage
    Logged
    Dennis,Ohio

    Offline duncz

    • Jr. Member
    • **
    • Posts: 41
    Re: Oil Filter Plate Assistance
    « Reply #4 on: July 22, 2010 - 08:08:55 AM »
    You can still order them from mopar. I got one of those and the gasket set from my dealership down the street.
    Logged

    Offline JS27N0B

    • Resident
    • *****
    • Posts: 4809
    • Member since Jan 28th 2003.
    Re: Oil Filter Plate Assistance
    « Reply #5 on: July 23, 2010 - 10:29:19 AM »
    Quote from: duncz on July 22, 2010 - 08:08:55 AM
    You can still order them from mopar. I got one of those and the gasket set from my dealership down the street.

    I always replace them on a small block when doing a rebuild. Had one leak once due to not enough crush left in it to seal properly.
    Logged
    1970 Challenger R/T Convertible 383/auto 1 of 516 *now sold after owning for 18yrs
    2007 Chrysler Aspen Limited AWD
    2013 Tige' RZR 343hp
    2016 PCP Challenger SRT Hellcat

    Pages: [1]
    « previous next »