Most Correct Challenger Shaker Trim Ring?

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Most Correct Challenger Shaker Trim Ring?  (Read 4445 times)

    Offline Brant

    • Jr. Member
    • **
    • Posts: 80
    Most Correct Challenger Shaker Trim Ring?
    « on: July 05, 2010 - 03:26:20 PM »
    Curious if any of you have used the reproduction Challenger Shaker trim rings out there and what was your experience with them? I've found two distributors. First is from Jims Auto Parts and sells for $299. The second is from Ben Snobar/Shakerparts and sells for $100. Has anyone used either one of these products? Did it match the hoods contour and inset well? thanks sooooo much. I need to order one, as I've just ordered the 'Harms' style conversion Kit.
    Logged


    Offline aris_unlimited

    • Project in full swing
    • Full Member
    • ***
    • Posts: 800
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #1 on: July 05, 2010 - 05:01:46 PM »
    I don't know exactly where you would get the perfect piece that you are looking for, BUT do NOT, NOT, NOT, NOT get it from jims auto parts. They have the absolute worst customer service out there. Go ahead and ask about them in general chat, nobody here will recommend them.
    Logged
    Cuda is gone :(

    74 satellite, daily driver/project now

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #2 on: July 06, 2010 - 01:40:54 PM »
    Not sure, but I think Resto Rick, who carries the old HARMS shaker conversion kit, may sell you just the ring.  And I think it is quite close from what I recall.

    http://www.restorick.com/proddetail.asp?prod=ShHdKitCuda

    shows 'Cuda kit, I think he has Challys too.
    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO

    Offline Brant

    • Jr. Member
    • **
    • Posts: 80
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #3 on: July 06, 2010 - 03:39:54 PM »
    RestoRick is where I ordered the kit. Rick is such a great guy! Rick and I were trying to find a high quality ring like the Cuda one being offered from BE&A. I'm assuming if Jims autoparts offers that ring with an official mopar licence and part number, it would be offered elsewhere – maybe? thanks guys.
    « Last Edit: July 06, 2010 - 03:42:11 PM by Brant »
    Logged

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #4 on: July 06, 2010 - 04:47:36 PM »
    Quote from: Brant on July 06, 2010 - 03:39:54 PM
    RestoRick is where I ordered the kit. Rick is such a great guy! Rick and I were trying to find a high quality ring like the Cuda one being offered from BE&A. I'm assuming if Jims autoparts offers that ring with an official mopar licence and part number, it would be offered elsewhere – maybe? thanks guys.

    So the ring that came w/the Harms kit is crap?  Hmm...

    I imagine that BE&A will soon be making trim rings for the Goodmark Shaker hoods that do not come w/a trim ring.  I'd contact Mike at BE&A when he plans on making them.

    Not sure what Jim's sells, but I imagine it can be found elsewhere and not sure who makes that one.  I'd ask him.
    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO

    Offline mopardave

    • Sponsor
    • Resident
    • ***
    • Posts: 3294
    • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
      • rosevillemoparts
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #5 on: July 06, 2010 - 08:32:18 PM »
    BEA is not making the challenger ring. If you ordered the Harms kit why didn't you get the ring from him  :clueless:

    i can contact AMD and see if they will see me just a ring? let me know
    Logged
    Mopar Dave
    Rosevillemoparts.com

    if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




    70 FK5 Challenger RT/SE
    70 FC7 70 Road Runner - Sold
    71 FM3 Challenger RT
    71 Cuda (in process for restoration)
    73 F8 Challenger
    1990 XJ - sold
    2000 Dakota Quad Cab
    2010 Ram Crew Cab 2500 4wd - sold
    2015 Ram Crew Cab 2500 4wd Black Out

    Offline Brant

    • Jr. Member
    • **
    • Posts: 80
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #6 on: July 07, 2010 - 11:28:40 AM »
    Mike at BE&A confirmed a few weeks back that he is not making the Challenger ring. Please don't be mistaken, the Domingo/‘Harms’ ring is NOT crap – they just don't match the same quality of the reproduction Cuda rings Mike has (which are said to be an almost perfect match to NOS). At this point, I believe I will have Rick send me the Harms ring, as a perfect ‘NOS-equivalent’ ring is yet to surface. Thanks for your input guys.
    Logged

    Offline Brant

    • Jr. Member
    • **
    • Posts: 80
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #7 on: August 08, 2010 - 11:41:17 AM »
    Does anyone have the ViseGrip style flange tool that is included in other conversion kits? Would you be willing to lend or sell me it, as I'd like to see how well it works? This way, I'll have an option of using the step down flange piece included or the tool. Any feedback or experiences with that flange tool would greatly help as well. Thanks so much.
    Logged

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #8 on: August 08, 2010 - 11:52:36 AM »
    I made my own shaker hood. As I mentioned in another post, the ring is not perfect. Notice the front tip is dead on but the rear one isn't. You'll need to re contour it in small areas using Rolocs.

    Another thing: don't waste your $ on the shaker ring gasket. Waste of money. Terrible fit, I had to cut it and make new holes for it to work.



    Logged
    Mike, Fremont, CA.

    Offline E-Body Products

    • E-Body Products
    • Sr. Member
    • ****
    • Posts: 1016
    • American Jobs Are Our Children's Future!
      • E-BODY PRODUCTS
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #9 on: August 08, 2010 - 07:30:28 PM »
    Not sure, but I have heard that the ring that Sherman has could pass as NOS.  I have had some feedback regarding the fit and everyone is happy.  If you want one, send an e-mail.  If you don't like it, we can return it for a refund.  That is a no lose scenario.
    Logged

    Offline Brant

    • Jr. Member
    • **
    • Posts: 80
    Re: Most Correct Challenger Shaker Trim Ring?
    « Reply #10 on: August 08, 2010 - 11:44:24 PM »
    hmmmm. that's interesting. Curious, what's that Sherman ring worth? I'll see if anyone else has an opinion about the Sherman ring. My main concern is the step down area – I'm on hold till I figure this out over the next few days. Thanks.
    Logged
    Pages: [1]
    « previous next »