anyone have a chassis diagram for 1973 Cuda

[leithal]

Sometime back I copied a diagram from our site that had several reference points and measurements of the 1970-1974 barracuda.  Since then I had a hard drive crash and I lost the diagram.  So, I am hoping someone can provide me with that diagram so I can save it to my "new hard drive and my backup"

[vinb]

I have the frame sheets on my other computer. I'll post them tonite....

[Alaskan_TA]

One diagram & other data at http://www.hamtramck-historical.com/ama/1973AutomobileManufacturersAssociation-01.shtml

[leithal]

Alaskan_TA,  Thank you for the link.   Looks like a great site with excellent info.  And I entered my vin to see if anything came up but didn't hit on anything.  I was hoping for a buildsheet or something cool like that.

[leithal]

vinb,  Sounds like what I'm looking for.  I'll stay posted and thank you.  I plan to build a structure using 2"x2" steel to support the body while doing panel/frame rail replacement and would like to have all the measurements to make certain things are aligned and stay aligned.

[badasscuda]

From the Chrysler Plymouth 1974 Body Service Manual.
Lots of good stuff in there.

[leithal]

Thank you badasscuda,  Exactly what I'm looking for.

[E-Body Products]

Thanks as well.  That will come in handy when I start working on my 71.  Lots of frame work needed.

[hooD]

Thank you badasscuda,  Exactly what I'm looking for.

The measurements are slightly different for a 1973 just in case you didn't know.  I have the same diagram in my '73 body manual that badasscuda posted for a 1974 model and I noticed some slight differences.  If you need the 1973 diagram let me know.

[leithal]

hooD,  I would appreciate a copy of what you have...not aware of the differences.  Thank you.

[E-Body Products]

If you have a 71, I need it.  I wasn't aware of any differences either.  To the best of my knowledge, most of the structural parts interchange for 71 and up Cuda's.

[vinb]

1973 Sheet..

I forgot, better late than never...

Sorry about that....

[hooD]

hooD,  I would appreciate a copy of what you have...not aware of the differences.  Thank you.

Figure 4