Mopar Balance plate

[punisher72]

Hi again guys!
http://cgi.ebay.com/ebaymotors/MOPAR-BALANCE-PLATE-TORQUE-CONVERTER-FLEXPLATE-440-383-_W0QQcmdZViewItemQQhashZitem4cf2813295QQitemZ330486067861QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Has anybody used a mopar balance plate before? Seems like a good idea instead of rebalancing the flywheel again.
Cheers

[Moparal]

http://cgi.ebay.com/ebaymotors/B-M-10230-Flexplate-Int-Bal-SFI-6-Bolt-Mopar-727-_W0QQcmdZViewItemQQhashZitem4cf2422cc2QQitemZ330481937602QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


See the bottom flex plate?  This works and doesnt require longer special bolts. Many companies make them. So prices vary. But notice the chunk missing off the bottom pic?  that is to install inernal balance flywheel on external balance engine like 360 and stuff. 

[tactransman]

http://cgi.ebay.com/ebaymotors/B-M-10230-Flexplate-Int-Bal-SFI-6-Bolt-Mopar-727-_W0QQcmdZViewItemQQhashZitem4cf2422cc2QQitemZ330481937602QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


See the bottom flex plate?  This works and doesnt require longer special bolts. Many companies make them. So prices vary. But notice the chunk missing off the bottom pic?  that is to install inernal balance flywheel on external balance engine like 360 and stuff.

[punisher72]

So Moparal.... That cut out flex plate is skinnier than the 1 i pointed out and is the better option???

[Moparal]

The one I pointed out is stronger and can be sfi approved. They have no center holes.  More people use the one I pointed out than the one you show.

[punisher72]

Ok cool. Thanx Moparal