new challenger goes12.44 in the 1/4 video

Author Topic: new challenger goes12.44 in the 1/4 video  (Read 3046 times)

Offline thedodgeboys

  • Resident
  • *****
  • Posts: 3633
  • ''Normal’s Overrated''
    • THE DODGE BOYS
new challenger goes12.44 in the 1/4 video
« on: November 22, 2010 - 07:42:05 PM »


It must be tuned up from stock for the show, even with a 392 thats a lot of car...  :burnout:
Go Fast & Have Fun...
70 6.1 HEMI 6-speed Drop Top...




Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: new challenger goes12.44 in the 1/4 video
« Reply #1 on: November 22, 2010 - 08:09:34 PM »
That car rolled off the assembly line and out to Sonoma County for media week. No modifications what so ever.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: new challenger goes12.44 in the 1/4 video
« Reply #2 on: November 24, 2010 - 02:56:14 PM »
The cold air off the bay helps too, Sonoma is cold at night, but has a little headwind onhe track.
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

Offline TA340-6pak

  • Jr. Member
  • **
  • Posts: 22
Re: new challenger goes12.44 in the 1/4 video
« Reply #3 on: November 24, 2010 - 09:20:05 PM »
Pretty impressive time, especially with the stock tires.  Not exactly sure how the guy is able to launch so well.  Would be interesting to see his 60 ft times.  I am also surprised that the extra 50 hp is good for a .5 to .6 improvement over what typical stock 6.1's are running which makes me think there is a little more done to that car than just rolling off the assembly line (noticed it had an M plate) hmmmm.....

I was never able to do better than 2.2sec with street tires but I have a 6 speed and I think that 392 is an auto which I know makes it easier to launch.

Car looks great in white.


"It does not matter if you win by an inch or a mile, Winnings Winning"  - Dom Torreto

My Other Rides
2009 Brilliant Black Challenger 6 speed SRT 8 w/Kenne Bell SC (PB - 11.725 @ 118mph   1.74  60 ft)
1992 Mustang Vortech Powered 306 (PB - 11.77 @ 119mph   1.59  60 ft)
1970 Challenger TA
2013 Grand Cherokee SRT 8
2012 Cadillac CTS V Coupe

Offline JaxHemi

  • Black Voodoo
  • Jr. Member
  • **
  • Posts: 57
    • Cenla Challenger Club
Re: new challenger goes12.44 in the 1/4 video
« Reply #4 on: November 24, 2010 - 10:21:55 PM »
Track prep must have been excellent if it did that time on street tires. If this is any indication, the new 6.4 will be a beast with a few bolt-on's and drag radials. I've got the feeling the 392 has a lot more left in it like the 5.7's have proved to be.

Jack
Custom tune by Johan @ Diablosport with raised shift points
JBA shorty headers
Custom 2-1/2" exhaust system with Magnaflow mufflers
Custom cold air intake w/ K&N filter & relocated 392 IAT sensor
245/45/17 Hoosier drag radials
185/50/18 M&H front skinnies
Hopnot Stage 2 rear kit for lowered cars (test car for autos)
New PB update: 12/11/11
12.497 @ 109.87  1.824 60' in -300DA

Offline thedodgeboys

  • Resident
  • *****
  • Posts: 3633
  • ''Normal’s Overrated''
    • THE DODGE BOYS
Re: new challenger goes12.44 in the 1/4 video
« Reply #5 on: November 25, 2010 - 07:40:08 AM »
The 60 foot was a 1.82 I'll see if I can post the time slip that was posted.

« Last Edit: November 25, 2010 - 12:39:39 PM by thedodgeboys »
Go Fast & Have Fun...
70 6.1 HEMI 6-speed Drop Top...

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: new challenger goes12.44 in the 1/4 video
« Reply #6 on: November 25, 2010 - 09:14:11 AM »
In in lust....err I mean love! :drool:
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline Goehner

  • Jr. Member
  • **
  • Posts: 345
  • 392 IE
Re: new challenger goes12.44 in the 1/4 video
« Reply #7 on: December 23, 2010 - 02:11:56 PM »
Supposedly this was a 6 speed car.

Not sure what they did to the suspension, but it must have been an improvement.
392 Edition on order
08 Mega Cab 3500 SRW 6.7 CTD, 2" Leveling kit, 33" Mickey Thompson MTZ
05 Durango Limited, Yea, it's got a HEMI!!

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: new challenger goes12.44 in the 1/4 video
« Reply #8 on: December 23, 2010 - 10:07:16 PM »
The car in the video is an automatic. If the 6.1's are any indication, the 6 speed cars will probably be slower at the track.
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....