Maybe I should start over here.... I'm not trying to diagnose someone elses problem. These rocker arms didn't break when I was using them,they broke on the previous owners motor, hence why I said he went to the T&D setup. He is running a solid roller cam and the spring pressures are obviously too much.
My problem is finding a set of rockers that will work for me. A set like these that I've pictured will work for me, except for the fact that they're shot
. I'm running a Lunati VooDoo cam hyd flat tappet version with matched springs. I'd say at this point, any rocker arm setup would be fine, in fact some would be over kill
. I've narrowed the wide variety down to saying I'm wanting a roller rocker, and it has to be a 1.6 ratio. The ones I mentioned before are ones that I've eyed, but have made no decision as of yet. So let me say, put these Indy's out of your mind for a minute and pretend that I don't have any rocker arms at all, and what I mentioned is what I'm looking for.
I brought these Indy's up for reference in case anyone is running high spring pressures and was looking for feedback.... That's all.
Also, I hope this reply doesn't come across rude, it's not supposed to. I see this thread going down a path it's not supposed to lol. These Indy's are not a problem for my motor because they will never see it... My problem is that I need to find another set, the lower the price the better, but I don't want to sacrifice quality, hence why I said I'm open to used stuff, as long as it's ok
... I hope that no one took anything the wrong way, just trying to keep this thread on the right track.
