Author Topic: Help with installing rear valance 73 challenger no cut outs. (Read 4326 times)

1mopar1 · « **on:** February 11, 2011 - 12:11:23 PM »

I have a 73 challenger without cutouts. I see that both ends attach to the lower trunk extensions and quarters, but how does it attach across the top portion and in the center area. I dont see any brackets in the middle area and nothing across the top. Any pictures would be great. Thanks doug

dodj · « **Reply #1 on:** February 11, 2011 - 03:28:26 PM »

There are no separate brackets. It attaches in the middle with the bracket that is welded to the centre of the valence as well as the ends.

Challenger6pak · « **Reply #2 on:** February 11, 2011 - 05:56:05 PM »

It sounds like you have a 1970 rear valance. Does it have a large bracket in the center or just nothing at all. Post a pic of it.

mopardave · « **Reply #3 on:** February 11, 2011 - 07:39:06 PM »

http://www.rosevillemoparts.com/product_info.php/p/71-74-plymouth-barracuda-rear-valance-brackets-pair/products_id/5525

these would be the correct bracket that mount inward, you will see 2 sets of holes to the right and left of the license plate area. two bolt mount to the rear crossmember and the single bolt end goes to the valance

1mopar1 · « **Reply #4 on:** February 11, 2011 - 11:33:52 PM »

Mopardave, are you sure they will work for a 73 challenger, the roseville site says 71 barracuda. Will try and get pictures tomorrow. Thanks.

mopardave · « **Reply #5 on:** February 14, 2011 - 10:10:09 AM »

71-74 E-body are ALL the same brackets.

burdar · « **Reply #6 on:** February 14, 2011 - 12:07:56 PM »

71-74 Challengers only use 1 bracket and it's welded to the center of the valence. That's it.

You should also have a V shaped bracket in the center of the valence to mount the license plate. 73-74 cars used the V bracket to space the plate out farther from the body because of the 5mph bumpers.

mopardave · « **Reply #7 on:** February 14, 2011 - 01:02:28 PM »

if you have the later valance then it mounts in the center. I forgot about the 73-74 have the center bracket. so many parts so many numbers,

1mopar1 · « **Reply #8 on:** February 21, 2011 - 04:58:06 PM »

pictures of brackets and installation points would be great. I just started hacking up the valance today so it will fit the quarters better.

dodj · « **Reply #9 on:** February 21, 2011 - 06:31:47 PM »

Quote from: 1mopar1 on February 21, 2011 - 04:58:06 PM

I just started hacking up the valance today so it will fit the quarters better.

Challenger6pak · « **Reply #10 on:** February 21, 2011 - 09:37:50 PM »

Quote from: 1mopar1 on February 21, 2011 - 04:58:06 PM

pictures of brackets and installation points would be great. I just started hacking up the valance today so it will fit the quarters better.

Author Topic: Help with installing rear valance 73 challenger no cut outs. (Read 4326 times)

1mopar1

Help with installing rear valance 73 challenger no cut outs.

dodj

Re: Help with installing rear valance 73 challenger no cut outs.

Challenger6pak

Re: Help with installing rear valance 73 challenger no cut outs.

mopardave

Re: Help with installing rear valance 73 challenger no cut outs.

1mopar1

Re: Help with installing rear valance 73 challenger no cut outs.

mopardave

Re: Help with installing rear valance 73 challenger no cut outs.

burdar

Re: Help with installing rear valance 73 challenger no cut outs.

mopardave

Re: Help with installing rear valance 73 challenger no cut outs.

1mopar1

Re: Help with installing rear valance 73 challenger no cut outs.

dodj

Re: Help with installing rear valance 73 challenger no cut outs.

Challenger6pak

Re: Help with installing rear valance 73 challenger no cut outs.