oil pressure gauge line placement on 360 ??

[Talkwrench]

My thoughts were to put a "T" type fitting in where the oil sender unit is so I can have both line and switch but if I put anything too long in there it looks like it will hit the vacumm advance on the dissy, is there an alternative? what have you done to get a line out from the block [360] while keeping the pressure switch??

[Talkwrench]

OPps forgot to add anyone know what type of thead fitting the switch is?

[72rtchallenger]

this may help,,its at autozone
/1/8 IN. NPT FEMALE TO 1/8 IN. NPT MALE TO 1/8 IN. NPT FEMALE PIPE BRASS T PURGE KIT/GAUGE ADAPTER FITTING

http://www.autozone.com/autozone/accessories/NOS-1-8-in-NPT-female-to-1-8-in-NPT-male-to-1-8-in-NPT-female-pipe-brass-T-purge-kit-gauge-adapter-fitting?itemIdentifier=387813

i believe its the correct thread but check to make sure

[femtnmax]

I installed a 45 degree brass fitting, pointed toward the firewall.  Then "t" off this to have gauge and light.

I bought the Redline electric oil gauge for non-rallye dash.  At Idle the gauge reads zero.  For all the owners talk about how great his product was, and the price I paid Redline... I'm not impressed.

I am really considering going to mechanical oil pressure gauge.  Not sure if I can mount it in the dash, or under.
I'll take the redline gauge to the pistol range and let the wife have at it...it will be gone in no time.

[Talkwrench]

Yup a couple of 9mm through it will do the trick!