Author Topic: Documenting Builds  (Read 1061 times)

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Documenting Builds
« on: March 27, 2011 - 11:08:33 AM »
I've thought about it. I've occasionally snapped a picture here or there. I really respect those of you who can do it, but I gotta ask, how the heck do you do all the nuts and bolt documenting as you go through a build?  I mean,  my garage has dirty car parts, oil on things, greasy hands, dirty gloves, etc.  The last thing I'm thinking of when I'm elbow deep in an engine build and I find a bad part is, hey gotta snap a picture. Not only that, but I'd be afraid to pick up the camera with my hands in that condition.

So how do you guys do it, after the fact, have a friend along the way, or what?




Offline 72rtchallenger

  • Sr. Member
  • ****
  • Posts: 1734
  • 72 to 70 clone
    • cardomain
Re: Documenting Builds
« Reply #1 on: March 27, 2011 - 12:50:03 PM »
after the fact and a reasonable good memory and 35yrs of knowledge and labeled coffee cans for the nuts and bolts if its a big job
72rtchallenger
my challengers restro at http://www.cardomain.com/ride/399010
what happens in the garage
stays in the garage

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: Documenting Builds
« Reply #2 on: March 27, 2011 - 02:19:57 PM »
I use the purple nitrite gloves.  After a few hours of work, I remove them and I snap the pics.
I havn't had many of these cars so I have only pulled a few apart.
Taking pictures is the only way I can make sure that I get the right nuts and bolts back to their original places.
The first few cuda's I purchased, didn't have much put together so I had to kind of wing it to get them back together.
My current car is the first I have taken full pictures of every bolt that was removed.

Honestly, the secret is the gloves. I keep a rag around with a little thinner and I can clean them up without taking them off.
Much easier than cleaning your hands every time you want to snap a picture.
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline Travis72

  • Full Member
  • ***
  • Posts: 894
Re: Documenting Builds
« Reply #3 on: March 27, 2011 - 05:40:27 PM »
Generally I do it after the fact.  If I'm trying to show some in progress steps then I either get my wife to take a few pictures or I bite the bullet and go get my hands cleaned up.   I enjoy it just because it allows people to learn from my many mistakes.

Travis
72 Cuda

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Documenting Builds
« Reply #4 on: April 02, 2011 - 02:25:28 PM »
I wear cheap gloves and use an old camera in the garage.  Sometimes I'll just do the before and after pics, if I don't finish the project I'll take during pics.lol

Tom

Lots of pics are gone, since I switched to imageshack most are still there.

http://www.cuda-challenger.com/cc/index.php?topic=35990.0
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline Challenger III

  • Sr. Member
  • ****
  • Posts: 1290
Re: Documenting Builds
« Reply #5 on: April 02, 2011 - 11:27:26 PM »
I have to clean my camera regularly!  :lol:
Mike    Yakima, Washington

Resto Thread:  http://www.cuda-challenger.com/cc/index.php?topic=66668.0