deck filler panel 72 challenger

[mopar#1]

I ordered a new filler panel and removed the old one I just wanted to know how I could reattach it . I could spotweld it but dont want to buy one any ideas. Thanks 

[72cudamaan]

Panel bonding adhesive.

[Slotts]

   That's what was used on my dutchman panel and it worked out great. The body guy said there are lots of auto makers that are using that process more and more.

Slotts

[mopar#1]

Thanks for the ideas. I work at a parts store so I will check it out. This site has really helps me out and the people here are great. Thanks again
 

[jimynick]

I wouldn't recommend ONLY panel bond. Panel bond on the sandwich seam in the rear window- sure, but you have to realize that the trunk hold open mechanism ties onto it as do the 1/4's. You must have access to some kind of welding equipment and at the least, put a few spots of brass at the corners and down through the gutter seam. 

[mopar#1]

Well I was thinking of drilling holes and plug welding the pieces back on that way. Any ideas on if that is the best way. Thanks