News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 340 Stroker Crank in a 318???  (Read 905 times)

    Offline Glennster

    • Full Member
    • ***
    • Posts: 879
    340 Stroker Crank in a 318???
    « on: June 24, 2011 - 08:46:44 PM »
     I have a Stroker crank and some 273 rods that were in a 340, will they work in my old 318? The 340 was a 1971 motor, the 318 is a 1970 motor.
    Thanks!
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: 340 Stroker Crank in a 318???
    « Reply #1 on: June 24, 2011 - 10:37:22 PM »
    no reason I can think of , the bore is different but very little else I know of so it has the same sized mains , the rods work , just need a different bore piston
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Road_Runner

    • Sr. Member
    • ****
    • Posts: 1825
    • Mopar Owner & Standard Bearer Since 1974
    Re: 340 Stroker Crank in a 318???
    « Reply #2 on: June 26, 2011 - 08:18:36 PM »
    Be sure to share your engine build here if you decide to go this route.  If I verify that the 318 in my 73 is original, I'm going to be inclined to leave it in there and just hop it up. 

    Later, Jim
    Logged
    1970 383 Roadrunner Tor Red
    1973 318 Barracuda Mist Green
    2014 Mustang GT/CS Convertible All Black
    Pages: [1]
    « previous next »