Six Pack for 440 (includes intake)

[JonS]

I have a for sale a complete 6-pack setup.  Includes intake, all carbs, linkage etc.  I believe it should bolt right up.

I purchased this as a working pull but ended up going a different direction with my build.

$1250 or best reasonable offer (also have an air cleaner if someone needs one).

[cudaized]

Intake: Does the intake apear to have been milled on the head side?
Are the carb bolt holes ok or are any threads stripped?
Could you please list the information cast on the intake?

Carbs: Could you list the information on each carb? (the air horn area)
Are the throttle shaft to carb body area worn?
Is that a ProForm metering block on the center carb?

Thank you for your time.

[JonS]

C,

No milling on the intake.

Carb holes look fine to me.

Intake Casting: It's just an aluminum edelbrock intake (CH6)

Carbs:

Outters: 4394-1, 4393
Center: 4392

Yes, I believe this is a Proform metering block on the center carb.

I looked over the carb carefully this afternoon.  Everything looks to be in good working order.  Fuel rail is in good shape and ready to receive gas.  Vacuum lines are attached / in place.  All linkage appears to be there and in good shape.

The only thing I've noticed that I hadn't previously seen was that one of the bracket holes for the vacuum pod is broken / missing.  I don't believe it was ever there (the screw isn't even there).  I can take a picture of this if you'd like.  It doesn't affect the function of the carb at all and it isn't loose or wobbly.  I doubt anyone would notice this especially because it is at the back of the motor, but I want to be honest about its condition.  I can try to post a picture of this if you'd like to see it.

Thanks!

Jon

[bucknbass]

Hi,

Where are you located?

[JonS]

B,

I'm in Pittsburgh.  I forgot to post that!

I have offered this setup to a member here for $1300 w/ the air cleaner.  I would offer that same deal to any of the forum guys here.

Thanks,

Jon

[Rare_T_A]

I'll take it. Just let me know how you want paid.

[Rare_T_A]

I've sent you 2 Pm's about this setup. Please give me a shout.

[JonS]

SPF to T/A. 

I'll update here when it is officially out the door.

Thanks T/A,

Jon

[crocha617]

I was just about to PM you. Oh well I won't need one for awhile any way.

[JonS]

Chris,

No worries.  I'll post here if something doesn't work out.  You can be #2

Jon

[eagetal96]

Good price, I just paid 2k for my 340 6 pack set up w/ air cleaner and all. And another $200 for a kit with some of the missing brackets and such.