Author Topic: 1968 dana 60 rear ???? (Read 1366 times)

71cudafish · « **on:** September 06, 2012 - 11:25:04 AM »

Local guy has 1968 Cuda Dana 60 for sale-- 4:10 ratio. If in good shape..what's it worth?? If assembly is complete. Also, has 4:56 gears
plus carrier--what would this be worth?? Will this part fit 70-74 Cudas?? Thanks, Mark any other compadibility with other mopars ?? :

Chryco Psycho · « **Reply #1 on:** September 06, 2012 - 04:07:17 PM »

$1500 or more , new would be 2200 & Real A body danas are rare

ChallengerHK · « **Reply #2 on:** September 06, 2012 - 09:09:02 PM »

I think that a-body axles are significantly narrower, but if you're planning to go with wide tires that could work in your favor.

Chryco Psycho · « **Reply #3 on:** September 06, 2012 - 09:12:02 PM »

Duh ..... missed the second part of the question , the only body it will work for is the A body , , a mid 60 B body is a better fit for a narrow diff in an E body

ChallengerHK · « **Reply #4 on:** September 06, 2012 - 09:14:33 PM »

Just for my edification, Neil, a-body axles cannot be made to work, period?

Chryco Psycho · « **Reply #5 on:** September 07, 2012 - 08:19:06 AM »

the a body was the narrowest diff , the E body is almost the widest , only the stn wagon & 71 Charger were wider , if you moved the springs in & moved the perches it might work with a highly offset wheel to the outside / deep dish wheel

HEMIHUNTER · « **Reply #6 on:** September 19, 2012 - 07:21:48 AM »

I have an E-Body DANA in our 68 cuda ......... im having trouble with rear u-joint not fitting into the DANA, last guy welded it in

Author Topic: 1968 dana 60 rear ???? (Read 1366 times)

71cudafish

1968 dana 60 rear ????

Chryco Psycho

Re: 1968 dana 60 rear ????

ChallengerHK

Re: 1968 dana 60 rear ????

Chryco Psycho

Re: 1968 dana 60 rear ????

ChallengerHK

Re: 1968 dana 60 rear ????

Chryco Psycho

Re: 1968 dana 60 rear ????

HEMIHUNTER

Re: 1968 dana 60 rear ????