Author Topic: 70 Mach 1 Hood pins (Read 1162 times)

Gumby · « **on:** January 13, 2012 - 10:15:26 PM »

My plan is to buy a set of Mustang 1970 Mach 1 hood pins - the twist type, and install them on my Challenger. The triangle space in the middle looks like a perfect place to have the Dodge Fratzog laser etched. With careful placement of the pins, you could line them up so the Fratzog is the first thing people see when they look at the hood. Anybody know how big these things really are? How big a hole I'd have to cut in the hood? The bracketry under the hood shouldn't be that big of a deal. It's all nuts and bolts. Just something a little different. Black chromed would look even better!

Moparal · « **Reply #1 on:** January 13, 2012 - 10:51:46 PM »

looks like about a 1 inch hole to me. they have repop kits for around 200 originals are pricey

http://www.ebay.com/itm/NOS-1970-FORD-MUSTANG-MACH-1-HOOD-PIN-KIT-/390004352078?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item5ace12244e

fletch · « **Reply #2 on:** January 14, 2012 - 06:21:01 AM »

Gumby,

2 5/8" or 67mm hole on my 70 Mustang. Approximately 3 1/8" OD on the hood cups.
Hope this helps.

Craig

Gumby · « **Reply #3 on:** January 14, 2012 - 06:24:11 AM »

Thank you fletch!, none around here to look at, and couldn't find specs anywhere.

Moparal · « **Reply #4 on:** January 14, 2012 - 08:53:26 AM »

sorry, I see what you need now..............my bad

brads70 · « **Reply #5 on:** January 14, 2012 - 01:32:17 PM »

Cool idea. I was looking at something similiar at one point too. What I didn't like is not having the ability to put a lock on the hood when I was going to be away from the car?
Just a thought?

Author Topic: 70 Mach 1 Hood pins (Read 1162 times)

Gumby

70 Mach 1 Hood pins

Moparal

Re: 70 Mach 1 Hood pins

fletch

Re: 70 Mach 1 Hood pins

Gumby

Re: 70 Mach 1 Hood pins

Moparal

Re: 70 Mach 1 Hood pins

brads70

Re: 70 Mach 1 Hood pins