glove box liner?

[74challenger03]

so how do you put the liner in,go under the dash?also bought new door locks witch one gos to what side?the locks were missing when i bought the car.thanks

[MEK-Dangerfield]

The glove box liner has to be taken apart to install. Put the bottom part in first. Then stuff the upper piece in and re-install the screws. This is done thru the glove box opening.

[74challenger03]

Mex,thank you so much.  god bless  dave

[Jamiez]

I've had luck just removing the front screws and collapsing the box, and sliding it in from the front.  Once it's in place, it's just a matter of reinstalling the screws.

I do recommend if you are going to use a factory crossover box mounted in the traditional location (the side of the glove box) you mount it to the box before you install the box.  Trying to mount it after the box is installed is a real pain!

[74challenger03]

i bought one from yearone

[Chryco Psycho]

either lock can go on either side , the tailpiece can be reversed ,