Author Topic: Speedo Cable question (Read 767 times)

NCtrueconservative · « **on:** March 14, 2012 - 07:32:32 PM »

My speedo doesn't work so I checked over my speedo cable. Was fine at the tranny. Unplugged it from the speedo, there was a small ring on the end of it that was broken. Plugged it back in and kinda wiggled it and the needle did jump a little. I figure I need a new cable. Probably looking at getting one from Napa or Advance. What length do I need, and is there anything special I need to look out for? Appreciate it guys

NCtrueconservative · « **Reply #1 on:** March 14, 2012 - 10:30:21 PM »

bump for help

LAA66 · « **Reply #2 on:** March 14, 2012 - 10:34:49 PM »

The dealer may still sell them.

NCtrueconservative · « **Reply #3 on:** March 14, 2012 - 10:40:45 PM »

will check. did a search on here and saw a thread saying it needed an 80 inch. Guess I'll go with that

LAA66 · « **Reply #4 on:** March 14, 2012 - 10:45:41 PM »

I bought mine about 5 years ago from the local Dodge dealership. There was talk about defective cables from China or something to avoid at the time. I have a vendors printout somewhere.

Chryco Psycho · « **Reply #5 on:** March 14, 2012 - 11:14:31 PM »

Check the dealer first , every one I have ordered from the aftermarket has had the wrong ends or length .

Author Topic: Speedo Cable question (Read 767 times)

NCtrueconservative

Speedo Cable question

NCtrueconservative

Re: Speedo Cable question

LAA66

Re: Speedo Cable question

NCtrueconservative

Re: Speedo Cable question

LAA66

Re: Speedo Cable question

Chryco Psycho

Re: Speedo Cable question