Author Topic: Removing 1/4 window glass  (Read 822 times)

Offline mrbill426

  • Full Member
  • ***
  • Posts: 775
    • All Around Mopars
Removing 1/4 window glass
« on: April 15, 2012 - 10:29:18 PM »
 :1zhelp: I am probably making this out to be more difficult than it is, but I can't figure out the easiest way to remove the rear quarter glass.   I have the inner panels and cat whiskers off, and looking in there they have more "works" than the door glass has, and with a lot less access.  I don't want to start removing bolts only to have something drop into the depths that I cannot reach.  If it is a real pain I am tempted to just leave the panes in there during the rotisserie resto.

Thanks

 :working:
MOPAR or NO car!

'72 'Cuda 340, white on white
'72 Sebring; bracket project
'64 Imperial Crown black on black
'66 Imperial Crown; parts car




Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Removing 1/4 window glass
« Reply #1 on: April 15, 2012 - 10:33:36 PM »
Take pictures and post them here as you dis-assemble them.
Put a rag stuffed below. I just lost a bushing today into the lower depths.  :banghead:
Mike, Fremont, CA.


Offline mrbill426

  • Full Member
  • ***
  • Posts: 775
    • All Around Mopars
Re: Removing 1/4 window glass
« Reply #2 on: April 18, 2012 - 12:38:39 AM »
For now, the glass stays  ;)
MOPAR or NO car!

'72 'Cuda 340, white on white
'72 Sebring; bracket project
'64 Imperial Crown black on black
'66 Imperial Crown; parts car

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: Removing 1/4 window glass
« Reply #3 on: April 22, 2012 - 03:21:22 PM »
I tried... wish I'd of seen this thread... The guides are two-piece. They popped apart and fell into the depths.  A rag at the bottom would have saved me.  :walkaway:
'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Removing 1/4 window glass
« Reply #4 on: April 24, 2012 - 10:14:26 AM »
the glass is easily removed
 Step 1 ..... place a rag at the bottom , I have fished the parts out with a coat hanger ... Yes I have made the same mistakes
 from there removing the bolts & slides is easy , take lots of pix , the tracks are moavble to adjust window fit

Challenger - You`ll wish You Hadn`t