I used this cam for about 100 miles. It's ground on 112 and is a little to much for my stock motor with the 600 carb. This cam sounded AWESOME, but it will need a motor with headers and a carb around 750 cfm. It's broke in on an engine dyno and it made 402 HP with all stock motor (Stock heads, intake, carb and manifolds) that was stroked to 438 inches.
Cam #H2311-2261-12
Exhaust lift 471 Centerline 117 Duration 226
Intake 478 Centerline 107 Duration 231
I paid $245 for the cam and $125 for the lifters. All the lifters are marked to go back in the same spot, but I would suggest getting new lifters as each motor is slightly different.
$50 + shipping and I guarantee it to work.
Cody 360-772-5555
