Author Topic: Pounded out another set of engine mounts!!!  (Read 3546 times)

Offline BS CUDA

  • Jr. Member
  • **
  • Posts: 402
Re: Pounded out another set of engine mounts!!!
« Reply #15 on: June 06, 2012 - 09:33:58 PM »
 The new Poly Locs just arrived and will probably install tomorrow along with the torque strap. I hope these mounts hang in there - and I am sure the torque strap will help alot. The old mounts probably had approx 60 or so 1/4 mile passes and the car does hook well and flex with heated tires. Perhaps this did not help but I did have bigger expectations of the mounts. Maybe I received a suspect set - some of the greatest products can fail.  :dunno:




Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Pounded out another set of engine mounts!!!
« Reply #16 on: June 06, 2012 - 09:39:46 PM »
I just recieved my poly locs today too!  Here's hoping they hold up?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0