tweak my ride!

[CUDA8U]

looking to squeeze a few more ponies,here's what i have:

440/30 over
ross flat top race pistons #82008,rb 9798-35 rings
CAT h-beam 4340 rods
muscle motors "street killer heads",250 cfm@.05 lift,stage 1 bowl port
comp cam 21-224-4,274/286 230/236 .488/.491
chain #2104
push rods comp #7840-16
summit x pipe #642130
m1 single plane
holley 850 street hp
8mm accel wires
headers?
compression 10-1 according to x-owner
2800 tci stall
want to change to 3:55 from 4:10

thinking of rpm eddies and bigger cam suggestion

fire away!!!!

email your build/suggestions to MANTAY@XPLORNET.COM

[Chryco Psycho]

The power will be in the compression / breathing & Cam
 You need to figure out where you want the powerband for this build , what gas do you plan to use in it , Quench will help a lot with detonation , if you still want to use a hyd cam or if a solid or roller better suits you . You could definatly add cam duration with a 2800 stall & 410 gears & get better lift as well , probably closer to .600 . For example this grind http://www.summitracing.com/parts/LUN-60304/
I have seen a Eddy Heads swap from ported Iron heads yeild a whopping 3 HP , you $ is probably better spent elsewhere , The new Super stealth , Indy EZ , & others should produce better results .