Where can i get steering parts for a 70 Challenger?

[HemiOrange70]

The bracket where the steering column goes through the firewall on the engine side came loose and the bearing assembly needs replacing. Can't find the parts anywhere. Any thoughts

[thedarkside]

When you say bearing are you refering to the white plastic bearing secured by a metal C clip that sits around the steering shaft sleeve? If so I'm pretty sure I have seen them on ebay. You could also call up dave at Roseville Mopar. He will probably have one and if not can point you in the right direction.

[HemiOrange70]

It's the lower steering colum bearing assembly. A metal cap holds the bearing and springs into place.

[Chryco Psycho]

my 70 has no brg , just a nylon bushing held by a C clip . the only brg is near the turn signal switch , at the bottom you just center the column with the plate on the firewall & tighten the bolts

[HemiOrange70]

So apparantly....I have the 74 set up with metal cap and bearing. I still have the cap and bearing, so i am guessing i can just move the bearing back into postion and replace the metal cap that 'plugs' into the firewall?