Author Topic: tail panel trim mount (Read 950 times)

AZDAN · « **on:** June 30, 2012 - 09:54:18 AM »

The tail panel trim that is used on a 70 'Cuda, does anyone have any pictures of what the fasteners look like? How many are used and locations of where they go would be helpful.

Topcat · « **Reply #1 on:** June 30, 2012 - 10:03:42 AM »

Here you go...

http://www.ebay.com/itm/1970-1971-Cuda-Tail-Light-Panel-Trim-Clips-/400255776531?hash=item5d311a7713&item=400255776531&pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr

AZDAN · « **Reply #2 on:** June 30, 2012 - 02:00:33 PM »

Thanks Topcat exactly what I needed.

Topcat · « **Reply #3 on:** July 01, 2012 - 01:09:55 AM »

BTW,

Watch where you drill.
Certain areas won't allow fitment of the clips. So check both inside and outside before determining the hole.
That picture is fairly accurate. .

AZDAN · « **Reply #4 on:** July 03, 2012 - 09:35:29 PM »

Do the 6 metal clips hold the 2 end pieces and the plastic clips hold the upper and lower? Or how does it go?

Topcat · « **Reply #5 on:** July 04, 2012 - 01:11:29 AM »

Quote from: AZDAN on July 03, 2012 - 09:35:29 PM

the 6 metal clips hold the 2 end pieces and the plastic clips hold the upper and lower

Correct

Author Topic: tail panel trim mount (Read 950 times)

AZDAN

tail panel trim mount

Topcat

Re: tail panel trim mount

AZDAN

Re: tail panel trim mount

Topcat

Re: tail panel trim mount

AZDAN

Re: tail panel trim mount

Topcat

Re: tail panel trim mount