'70' Cuda Ignition switch will not go back to lock to allow key to be removed

[Aussiecuda74]

Hi Everyone,
My '70' Cuda ignition switch will not return to the lock position and wont allow the key to be removed? Has anyone had this problem before? and more importantly can anyone help with pictures or steps that can be taken to remove the lock so it can be rectified if not an easy fix.
Thanks

[Moparal]

just below your key, on the column can be turned and the key will come out. You probably dont have the linkage hooked up to the trans that came from the factory. The column cylinder will turn, so turn it counter clock wise to remove the key. If you notice under the hood, a little lever at the column by the firewall, this is the same piece you would turn.  Nothing is broke

[Aussiecuda74]

 :dunno:Thankyou for the help, very simple fix. All sorted.