416 final decision ( what do you think/help)

[cudasteve72]

Here is what I have so far:

340 .030 over ready to go
scat 4 inch forged crank
icon forged flat top pistons I beam rods Clevette bearings
rpm air gap knock off Intake
pro form 850 carb
hooker comp headers
Edelbrock aluminum heads 65 cc chamber

Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench
#60779 | #60179
Valve Lift   .100"   .200"   .300"   .400"   .500"   .600"   .700"
Intake   69           129            188          232            249            251   -
Exhaust   64           108            142           171            183            190   -

I am down to a few final decisions these are the cams and rockers I am thinking about:
Cam:         http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=648&sb=0
Rockers:   http://www.summitracing.com/parts/CCA-1622-16/

I am very interested in what you guys think of for what I need and what I have and the whole package ie what kind of power do you think it will make.  Any ideas or sugestions you have throw them out there i am open.  I am planning for pump gas also.

[dodge freak 2]

trans - gearing ?

i'm a big fan of stock stroke 340's and 4.10 gears but one benefit of a 4 inch stroke is 3.23's can make a nice all around gear on the street

[Chryco Psycho]

the cam seems lazy to me , a lot of advertised duration for minimal lift , I am sure I can get a similar flat tappet cam .
 Call Lunati , they have some awesome new street rollers not listed in their catalog

[Chryco Psycho]

Prw has a similar stainless rocker for less cost with multiple ratios
http://www.ebay.com/itm/MOPAR-318-340-360-Stainless-1-6-Roller-Rockers-Shafts-/220588963261?pt=Motors_Car_Truck_Parts_Accessories&hash=item335c2075bd&vxp=mtr

[cudasteve72]

It's a 4 speed it has 3:23 now but I'm debating 3:55 or 3:73.