AC Heater Control Valve

[peterro]

I have a generic valve that I was going to mount and noticed that 1 of the 4 tubes is smaller than the rest. Also the cable actuation is the opposite of the dash control (cooler on the dash makes the valve open).

So, I found this on ebay, is it correct?

http://www.ebay.com/itm/OE-Style-Mopar-Cable-Operated-Tempature-Control-Valve-HEATER-VALVE-H1948-or-/230834352429?pt=Motors_Car_Truck_Parts_Accessories&hash=item35beccb12d&vxp=mtr#ht_2867wt_906

Thanks in advance.

[Chryco Psycho]

It looks like the ones I have seen but is it identical not positive

[peterro]

I'm looking more for functionality and I'm not too worried about exact replacement. I'd like it to work correctly with the heater controls on the dash.

Thanks.

[74challenger03]

1 of the 4 tubes is smaller because it gos to the intake side 1/2 hose

[peterro]

Hmm, both hoses on my water pump housing are the same size. Same goes for the tubes on the heater core. When you say intake side, which specific connection is that?

[74challenger03]

1st my car is a 318, both lines to the heater core are 5/8 hose. Now going to the engine the 5/8 hose lower line  gos to driver side of water pump. The 1/2 line gos right next to the thermostat on the pass side behind the ac pump.  Hope that helps, i believe my stuff is all original.

[swede-cuda]

1st my car is a 318, both lines to the heater core are 5/8 hose. Now going to the engine the 5/8 hose lower line  gos to driver side of water pump. The 1/2 line gos right next to the thermostat on the pass side behind the ac pump.  Hope that helps, i believe my stuff is all original.

          my -70 bb is the same