Author Topic: STRANGE ENGINEERING NEW DANA 60 FOR 71 CUDA (Read 1582 times)

71cudafish · « **on:** October 23, 2012 - 08:34:23 PM »

anyone have experience with the strange new dana 60 is it a bolt in???,drive shaft rework req.

now a 8 3/4, 71 cuda 727 trans, THANKS!!!!!!

brads70 · « **Reply #1 on:** October 23, 2012 - 10:09:23 PM »

I ordered one off Cass AKA DrDiff Mine bolted in no problems! You will need to know what type of U joints you want. I'd suggest getting the B-Body width and Cass's 1" relocation brakets. ( I did) This will allow you to run wider rims/rubber in the future. After I got it I added the stainless cover as it looked more "stock" to me than the aluminum one that came with it.
I ordered the truetrac option with mine and disc brakes and H/D bearings and retainers.
DrDiff sells the Strange S60 Dana's.... forgot to mention that!

GranCuda1970 · « **Reply #2 on:** October 23, 2012 - 10:27:58 PM »

Snice!!!!

Chryco Psycho · « **Reply #3 on:** October 23, 2012 - 10:51:39 PM »

driveshaft needs to be about 1 " shorter with the Dana

Author Topic: STRANGE ENGINEERING NEW DANA 60 FOR 71 CUDA (Read 1582 times)

71cudafish

STRANGE ENGINEERING NEW DANA 60 FOR 71 CUDA

brads70

Re: STRANGE ENGINEERING NEW DANA 60 FOR 71 CUDA

GranCuda1970

Re: STRANGE ENGINEERING NEW DANA 60 FOR 71 CUDA

Chryco Psycho

Re: STRANGE ENGINEERING NEW DANA 60 FOR 71 CUDA