Author Topic: front wheel offset question  (Read 607 times)

Offline cordodge

  • Full Member
  • ***
  • Posts: 779
front wheel offset question
« on: December 11, 2012 - 08:38:49 AM »
hey does anyone know if a 15x7 torque thrust wheels with a 3.75 back space will fit the front of a challenger ? not sure what it would look like.   :dunno:
1970 challenger 95% done
1969 roadrunner in progress
1969 D-100 13,000 mile truck
1969 L-700 tilt cab in progress
2007  Dodge Ram 4x4
2017 hyundia Santa fe ultimate
1977 VERY UNDERSTANDING WIFE !! 😇




Offline MetalMilitiaSRT

  • Jr. Member
  • **
  • Posts: 44
Re: front wheel offset question
« Reply #1 on: December 11, 2012 - 03:00:49 PM »
hey does anyone know if a 15x7 torque thrust wheels with a 3.75 back space will fit the front of a challenger ? not sure what it would look like.   :dunno:

I don't see why not... I'm about to put 17x8 with 4" bs. As long as you don't crazy with the tires.
The only issue I can see is if you ever intend to upgrade the brakes a 15" may not be big enough to fit a good size rotor.
Other than that you should be fine.

When in doubt...Measure  ;)
73 Challenger
05 Crossfire SRT-6
06 Brutale 910s
09 V-Star
83 Civic (commuter...42mpg!)

Offline cordodge

  • Full Member
  • ***
  • Posts: 779
Re: front wheel offset question
« Reply #2 on: December 11, 2012 - 05:16:22 PM »
ok thx, i just wasn't sure about the back spacing. i will be using a alterkation front end but im sure everything will be in the same location as the stock set-up,im going to use
26x8x15 tires on the front.  thx for your help
1970 challenger 95% done
1969 roadrunner in progress
1969 D-100 13,000 mile truck
1969 L-700 tilt cab in progress
2007  Dodge Ram 4x4
2017 hyundia Santa fe ultimate
1977 VERY UNDERSTANDING WIFE !! 😇