Author Topic: Turn signal cam only repalcement, will this work? (Read 925 times)

KillerBee · « **on:** November 14, 2012 - 03:23:29 PM »

Getting parts together to replace my broken turn signal cam, won't hold in up position but everything seems to work fine and wiring looks good.

From reading older posts here the Standard TW7 is the correct complete turn signal switch replacement, but the cheapest I've found it is $70 at Rock Auto. $:-\$

It appears Dorman sells just the cam that can be cut and soldered into the switch wiring under the can for much less.
http://www.jegs.com/i/Dorman-Products/326/49301/10002/-1?parentProductId=1532093

Will this work?
How difficult is it to remove the old turn signal cam?

Chryco Psycho · « **Reply #1 on:** November 14, 2012 - 06:19:23 PM »

not hard to change , you do have to cut & solder the two wires , mixed results but worth a try

don340-4 · « **Reply #2 on:** January 14, 2013 - 11:40:04 PM »

Didn't work for me, contacts are not reliable, I ended up just buying the complete harness & switch from Year One licensed Chrysler restoration part, works perfect now.

CHL2T · « **Reply #3 on:** January 22, 2013 - 03:05:07 PM »

I had to file the contacts to get the dorman to work in the Charger and Challenger other than that a pretty straight forward swap

Author Topic: Turn signal cam only repalcement, will this work? (Read 925 times)

KillerBee

Turn signal cam only repalcement, will this work?

Chryco Psycho

Re: Turn signal cam only repalcement, will this work?

don340-4

Re: Turn signal cam only repalcement, will this work?

CHL2T

Re: Turn signal cam only repalcement, will this work?