News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Need front axle ID help (on my MXT)  (Read 581 times)

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Need front axle ID help (on my MXT)
    « on: March 30, 2013 - 12:26:06 AM »
    Does anyone know what axle this is or a good website that would know?  The International dealership has absolutely no information on the MXT's and I want to remove my hub.  I can't seem to get the hub off to replace the rotor even though I've got it loose (can't see anything else that needs removed).  Need to find the type of axle so I can get a manual.  Don't want to put a puller on it if it still need to have something removed.
    « Last Edit: March 30, 2013 - 01:00:22 AM by C O D Y »
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.


    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Need front axle ID help (on my MXT)
    « Reply #1 on: March 30, 2013 - 12:32:57 AM »
    This is the tag...
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline BIGSHCLUNK

    • Sr. Resident
    • ******
    • Posts: 9341
    • Miss NIKKI - were you this hot at 48?
    Re: Need front axle ID help (on my MXT)
    « Reply #2 on: March 30, 2013 - 12:48:31 AM »
    Cody , I would think that snap ring, take off and then that piece w the groove in it will have to be spun out, This kind of reminds me of very old style blazer / chevy truck hubs. BUT I've never heard/seen these before.. ever.  :grinno:
    Logged
    70 Chally R/T Convertible- Yes she's really got a HEMI, no she's not a Charger!
                                                 [o o o o]
                                                      OO
                                                      OO 
                                                  [o o o o]
    https://www.aanddtruckautoparts.com/
    http://www.facebook.com/pages/A-D-Truck-and-Auto-Parts/67427352555?ref=hl

    Offline shoooter

    • Full Member
    • ***
    • Posts: 701
    Re: Need front axle ID help (on my MXT)
    « Reply #3 on: March 30, 2013 - 02:41:15 AM »
    I agree its just like a old Chevy front axle with manual hubs. Take that snap ring off and you should be able to unscrew the center piece with a axle socket or a hammer and screwdriver. Then remove the bearing , pull the caliper And the whole assembly should come off.there might be a thin outter retainer ring also. I cant remember if you need to pull the axle shaft or not. You might have to seperate them on a bench. A good site is www.pirate4x4.com it will have all the info you need
    « Last Edit: March 30, 2013 - 04:33:08 AM by shoooter »
    Logged

    Offline 72cudamaan

    • Resident
    • *****
    • Posts: 3248
    Re: Need front axle ID help (on my MXT)
    « Reply #4 on: March 30, 2013 - 10:21:26 AM »
    I agree with the above, but also the splines on the shaft are probably a bit rusted to the splines in the hub. I wouldn't
    be suprised if you need to hit the shaft with a rubber deadblow to loosen it.
    Logged
    If I cant fix it, it's broke
     
    Andy  (phukker whither)

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Need front axle ID help (on my MXT)
    « Reply #5 on: March 30, 2013 - 01:14:20 PM »
    Great 4x4 site!  They were right on. A couple good blows and a little pressure from a puller and it fell right off.

    Thanks man!

    Quote from: shoooter on March 30, 2013 - 02:41:15 AM
    I agree its just like a old Chevy front axle with manual hubs. Take that snap ring off and you should be able to unscrew the center piece with a axle socket or a hammer and screwdriver. Then remove the bearing , pull the caliper And the whole assembly should come off.there might be a thin outter retainer ring also. I cant remember if you need to pull the axle shaft or not. You might have to seperate them on a bench. A good site is www.pirate4x4.com it will have all the info you need
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Need front axle ID help (on my MXT)
    « Reply #6 on: March 31, 2013 - 03:05:13 PM »
    on another note , I found a CXT down here
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Need front axle ID help (on my MXT)
    « Reply #7 on: March 31, 2013 - 04:35:50 PM »
    .... and did you buy it?  I like the CXT, but really to big to be a daily driver.

    Quote from: Chryco Psycho on March 31, 2013 - 03:05:13 PM
    on another note , I found a CXT down here
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Need front axle ID help (on my MXT)
    « Reply #8 on: March 31, 2013 - 09:38:09 PM »
    Yeah right buy it LOL .... with what ?
     No I just know where there is one here , sure surprised me , never thought I would see one here !!
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »