Author Topic: radio trim piece removal (Read 1121 times)

71'cuda340 · « **on:** March 25, 2005 - 06:20:26 PM »

I'm trying to install an aftermarket radio in my cuda.� The problem is that I can't seem to find the screws that hold the outer dash trim piece on.� I'm talking about the piece that curves in front of the radio and is grained like the dash.� Do you have to pull the whole dash to get to its screws?� That's kinda how its looking.� �:dontknow:� � That would suck.� �

torredcuda · « **Reply #1 on:** March 25, 2005 - 06:55:12 PM »

You should be able to get them from the back but it`s a b!tch.Pull the ash tray door out and unscrew and remove the ash tray to help get to the screws on the right side.The other screws you have to get from under the dash either by climbing under or just finding them by feel.

Chryco Psycho · « **Reply #2 on:** March 25, 2005 - 07:59:57 PM »

I agre it can be done without removing the dash but is not fun , there are 3 screws in a row vertically beside the ashtray & 2-3 more along the bottom edge

4Cruizn · « **Reply #3 on:** March 25, 2005 - 08:49:55 PM »

I've done it with the dash still in! But like everyone said . . . pain in the ASS! :boxer:

71'cuda340 · « **Reply #4 on:** March 26, 2005 - 11:04:09 AM »

Thanks guys. I geuss I give it a try.

Author Topic: radio trim piece removal (Read 1121 times)

71'cuda340

radio trim piece removal

torredcuda

Re: radio trim piece removal

Chryco Psycho

Re: radio trim piece removal

4Cruizn

Re: radio trim piece removal

71'cuda340

Re: radio trim piece removal