Author Topic: Ashtray Nylon/Plastic Glides?  (Read 676 times)

Offline filmsurgeon

  • Full Member
  • ***
  • Posts: 594
  • Resto-Mod '70 Convertible Challenger
Ashtray Nylon/Plastic Glides?
« on: May 12, 2013 - 08:38:36 PM »
Does anyone know if these are available, and if so, where?  I broke one of mine when removing it.  I am having the tray re-plated, and needed the glides removed for this.  It seems that they are common to ashtrays from various brands/models/years.  First photo is of the undamaged one I have left.  The other three photos are of other ashtrays with similar/same "glides".  They are either made of plastic or nylon, but I'm not sure if they are called "glides".  I searched the internet using all the "key words" I could think of, but no luck.  Can anyone help?  Thanks.
1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.




Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Ashtray Nylon/Plastic Glides?
« Reply #1 on: May 12, 2013 - 09:35:37 PM »
never seen them but a quick search turned up this...looks close
http://www.swisco.com/Sliding-Window-Glide-Button/pd/Sliding-Window-Guides/87-132
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline filmsurgeon

  • Full Member
  • ***
  • Posts: 594
  • Resto-Mod '70 Convertible Challenger
Re: Ashtray Nylon/Plastic Glides?
« Reply #2 on: May 13, 2013 - 12:02:24 AM »
never seen them but a quick search turned up this...looks close
http://www.swisco.com/Sliding-Window-Glide-Button/pd/Sliding-Window-Guides/87-132


Very interesting!!  Those might actually work.  I see there are two different sizes.  I'll have to measure mine to compare dimensions.  At worst, I could get the closest matching size, and modify to fit.  Thanks very much for the link.  Don't know how you found those, but nice work.
1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.