Original Mopar 'Replacement' E Body Rear Swaybar Frame Brackets

[Road_Runner]

Picked up a set of what I have to think is fairly rare original Mopar parts E Body rear frame brackets.  These have studs welded in which eliminates the need to squeeze a replacement bushing from the side.  I believe these are similar in design to what Firmfeel sells now but thought I'd share some pics of a little known Mopar part:

Later, Jim

[burdar]

I think those are B-body brackets.  I thought someone told me that the B-body brackets used the studs.  Check to see if they fit the E-body frame rails.

[Road_Runner]

Looked the part number up here and said it was for E Body & 71-later B Bodies:

http://www.mymopar.com/index.php?pid=99

[burdar]

The factory E-body bushings were never serviceable.  They never came with the studs.  Since the B-body parts had the studs, maybe they were to be used as replacements.

[Road_Runner]

The factory E-body bushings were never serviceable.  They never came with the studs.  Since the B-body parts had the studs, maybe they were to be used as replacements.

That's what I figure too. 

Later, Jim