Author Topic: Hotchkis TVS  (Read 3902 times)

Offline lunatic fringe

  • Jr. Member
  • **
  • Posts: 24
Re: Hotchkis TVS
« Reply #15 on: July 11, 2013 - 05:29:05 PM »
OK, jacked her back up adjusted torsion bolts ( Bolt head is even with the bottom of LCA"s ), put back on ground and like the height, drove down driveway again and back in shop and dropped alittle bit, now sitting at 25 1/2 in. from ground to top of wheel well. That's were I'm hoping it stays, I'll hook back up the sway bar and take a drive down the road a ways and see's what happens. Crossing my fingers!!!!




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Hotchkis TVS
« Reply #16 on: July 11, 2013 - 05:33:05 PM »
Sounds about right , the bolt is generally close to even with the bottom of the Arm

Challenger - You`ll wish You Hadn`t

Offline lunatic fringe

  • Jr. Member
  • **
  • Posts: 24
Re: Hotchkis TVS
« Reply #17 on: July 22, 2013 - 04:43:31 PM »
OK, got everything buttoned up and aligned, drivers side had to do alittle bit of adjusting, passenger side spot on for Hotchkis's specs. Took her out and drove nice and straight, font end has a nice soft ride to it, now to just soften the ride on the rearend alittle bit. Thanks to all that had input on my questions, it's greatly appreciated.