Rallye Rim 15x7 Trim Rings

[EMCD]

Where can i buy a set of trim rings for my 15" Raylle rims? I might also need a set for my 15x8's. Thanks

[moparrecyclers]

i have not seen any that are specific to the 15x8's The 15x7 do fit but leave the extra 1" gap.
I purchased a used set on ebay a few weeks back that arrived in awesome shape for 125.00 plus shipping and these were original dated 88' and 87' vintage. I also purchased a new set from Davids Rally Wheels for $90.00 but the outer profile is different from the originals so I am looking for a new home for them.

[mopardave]

NOBODY. makes a ring with the correct profile anymore, Since Chrysler and D&N bending parted ways a while back, AMD was suppose to take up that project, but nothing yet, wheel vinteques does have a 15x7 that everyone currently sells, but again the face profile is wrong same as with the brushed, those are really jinky,

15x8 would take the 15x7 ring, but you will have a great gap at the hub.

[EMCD]

crap... that's what i tought. moparrecyclers, what Rally Wheels for $90.00 did you get? did they fit well on the 15x8's, but had a finish that wasn't consitant with your front trim?

[moparrecyclers]

crap... that's what i tought. moparrecyclers, what Rally Wheels for $90.00 did you get? did they fit well on the 15x8's, but had a finish that wasn't consitant with your front trim?

I bought the 56 series 15x8's from Summit for 101.00 including shipping and the  trim rings (for mopar & olds?) From Dave Rally Wheels. I had a friend tell me they fit great which they do on his car but the profile on the outer edge does not match the originals. I will post some pics in a day of so to show the difference. They are a high polish ring, but could be dulled down with ease for the 71's. I got some minty used originals on eBay for $125.00 that are buffed but I am going to burnish them when I re-do the car.

[moparrecyclers]

Here are the pics of the factory profile first followed by the ones sold on ebay and on his site (davids rally wheels)