News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 [2]

    Author Topic: Need Milidon dipstick advice  (Read 1795 times)

    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: Need Milidon dipstick advice
    « Reply #15 on: October 30, 2013 - 01:46:28 AM »
    or, you could dent the pan, if it would be simple.

    I'd be a little leery grinding on the K member, since it
    carries some heavy loads, but I've never done it.
    Metal can crack with the right load and starting point/flaw.
    Just something to consider.
    In testing the strength of metals, they put a notch in it,
    then apply the force.
    « Last Edit: October 30, 2013 - 01:48:25 AM by cudabob496 »
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000


    Offline PlumCraZRT

    • Full Member
    • ***
    • Posts: 631
      • My Challenger's Crappy Website
    Re: Need Milidon dipstick advice
    « Reply #16 on: October 30, 2013 - 05:11:48 PM »
    Quote from: cudabob496 on October 30, 2013 - 01:46:28 AM
    In testing the toughness of metals, they put a notch in it, then apply the force.

    FTFY
    Logged
    mmmmm.... Mopar.... *drool*

    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: Need Milidon dipstick advice
    « Reply #17 on: October 30, 2013 - 06:05:26 PM »
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000

    Offline EMCD

    • Full Member
    • ***
    • Posts: 849
    Re: Need Milidon dipstick advice
    « Reply #18 on: October 30, 2013 - 09:08:43 PM »
    So, the pan has clearance around the whole k member, headers, etc. how much do I need for the k member 1/4" or 1/2"? How about the headers?
    Logged

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Need Milidon dipstick advice
    « Reply #19 on: October 30, 2013 - 09:48:46 PM »
    Quote from: brads70 on October 29, 2013 - 07:25:58 AM
    That's what I did  when I used the Milodon BB road race pan

    Mine hit on the brackets for the motor mounts. Didn't take much to clear it?
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline EMCD

    • Full Member
    • ***
    • Posts: 849
    Re: Need Milidon dipstick advice
    « Reply #20 on: October 30, 2013 - 10:22:03 PM »
    No, I have small block and have about 1/4 or 1/2" around the pan.
    Logged
    Pages: 1 [2]
    « previous next »