Ok I admit I'm not good with the search. I would think this has probably been covered before. Ready to put my dash back in and have the harness laying in place in the dash frame. Several questions about what some of the leads/plug-in are for. IS there a post that shows pictures of what the different connections are for? Also I replaced the factory gauges with after market so the lighting I was planning on tapping into the factory gauge light wiring. Which wire is + and what color wire is - on the factory light wires. also the light bar above the gauges (3 lights) orange wire does that plug into a 3 way yellow pig tail? It looks like that is the only place a unless I have the harness laid out wrong. There is a red socket toward the center or passenger side of the dash I'm guessing a relay of sometime type went there. Any ideas of what it is used for? Any pictures or links to a post that covers this information would be great. My memory is worse then I thought, old time and CRS.