News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Towing with an A833 4 speed  (Read 2226 times)

    Offline 7Dcuda

    • Jr. Member
    • **
    • Posts: 407
    Towing with an A833 4 speed
    « on: November 21, 2013 - 07:45:22 AM »
    If using a towbar to tow a car with an A833 4 speed do you need to remove the driveshaft? 
    Logged


    Offline 70CUDA4SPEED

    • Jr. Member
    • **
    • Posts: 201
    Re: Towing with an A833 4 speed
    « Reply #1 on: November 21, 2013 - 07:52:41 AM »
    NO!
    Logged

    Offline 7Dcuda

    • Jr. Member
    • **
    • Posts: 407
    Re: Towing with an A833 4 speed
    « Reply #2 on: November 21, 2013 - 08:07:16 AM »
    Quote from: 70CUDA4SPEED on November 21, 2013 - 07:52:41 AM
    NO!

    So as is with car in neutral is good?
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Towing with an A833 4 speed
    « Reply #3 on: November 21, 2013 - 09:12:08 AM »
    I disagree , in neutral the input shaft & countershaft are stationary so all that is turning is the mainshaft which is well above the oil level .
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline 7Dcuda

    • Jr. Member
    • **
    • Posts: 407
    Re: Towing with an A833 4 speed
    « Reply #4 on: November 21, 2013 - 09:40:42 AM »
    Looks like I should remove the driveshaft.....better safe than sorry.
    Logged

    Offline ToxicWolf

    • Resident
    • *****
    • Posts: 2416
    Re: Towing with an A833 4 speed
    « Reply #5 on: November 21, 2013 - 11:40:37 AM »
    Quote from: 7Dcuda on November 21, 2013 - 09:40:42 AM
    Looks like I should remove the driveshaft.....better safe than sorry.

    I always pulled them when I was towing. Even though I didn't think it was necessary.
    Logged

    Offline HP_Cuda

    • Hit the skinny little pedal on the right!
    • Sr. Resident
    • ******
    • Posts: 5268
    • Mopar or No Car!
    Re: Towing with an A833 4 speed
    « Reply #6 on: November 21, 2013 - 01:19:42 PM »

    It depends if you are only going a few miles or longer distances.

    Probably why folks trailer their cars for shows that are quite far away.
    Logged
    1970 Cuda Clone 440 4 speed - sublime green
    1970 Cuda 383 4 speed - yellow - SOLD

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Towing with an A833 4 speed
    « Reply #7 on: November 21, 2013 - 09:00:29 PM »
    In normal operation the countershaft is rotating throwing oil up on the main shaft , towing this is not happening , can't be good for it  :2cents:
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline HP_Cuda

    • Hit the skinny little pedal on the right!
    • Sr. Resident
    • ******
    • Posts: 5268
    • Mopar or No Car!
    Re: Towing with an A833 4 speed
    « Reply #8 on: November 22, 2013 - 12:54:15 PM »

    If I was towing to a shop a mile away I wouldn't worry about it but longer distances I would most likely trailer it.
    Logged
    1970 Cuda Clone 440 4 speed - sublime green
    1970 Cuda 383 4 speed - yellow - SOLD

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Towing with an A833 4 speed
    « Reply #9 on: November 22, 2013 - 09:08:06 PM »
     :iagree:
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Sleepychallenger

    • Sr. Member
    • ****
    • Posts: 1091
    Re: Towing with an A833 4 speed
    « Reply #10 on: November 23, 2013 - 11:43:33 AM »
     :iagree: I had a trans blow up and rip a chunk out of the block when the trans popped into gear when my dad was towing it. It was a 3 on the tree but I imagine it could happen with any trans
    Logged

    Offline AARTA340

    • Sr. Member
    • ****
    • Posts: 1219
    Re: Towing with an A833 4 speed
    « Reply #11 on: December 12, 2013 - 02:53:52 AM »
    Years ago I bought a 4 speed car in upper Michigan and towed it to Washington State. No problems and it did not harm the tranny. After reading the other posts to the thread, it may be better to remove the DL, but I would not hesitate to to tow on a short distance.
    Logged
    Pages: [1]
    « previous next »