where do the horn relay wires go?

[halle09]

i have a 73 cuda and i replaced the fuse block with a modern one and because i didnt have a relay in it i did not know what the wires were for. so i put em together and left them. i want a horn obviously and i need to know on the relay itself what wires go where? i have a 3 prong without the key buzzer so if you are looking at it so it looks like this

(Dashes are the prongs themselves) what goes where IE?( 12volt constant,ground to steering wheel and to horns)...?
       Prong A  _
      Prong B _  _ Prong C

[HP_Cuda]

i could tell you on the stock fuse block as I had to locate the wiper motor lead the other day ( I love it a plan comes together ) which is close to the horn but you will have to. Either post up a pic of refer to the instructions that came with the new fuse block.

[halle09]

i could tell you on the stock fuse block as I had to locate the wiper motor lead the other day ( I love it a plan comes together ) which is close to the horn but you will have to. Either post up a pic of refer to the instructions that came with the new fuse block.

i made my out fuse block without a horn relay socket..

i just need to know what wires go on which prong for example top prong is 12v constant bottom right is ground on the steering wheel and which is horn ...etc.

[HP_Cuda]

If you look at this schematic (for a 73) then you would see it has a 4 prong horn relay:

http://www.mymopar.com/downloads/1973/73BarracudaA.JPG

[halle09]

If you look at this schematic (for a 73) then you would see it has a 4 prong horn relay:

http://www.mymopar.com/downloads/1973/73BarracudaA.JPG

Never mind i figured it out horns all goot to go thanks

[HP_Cuda]